Table of Contents
Advertisement
Positioning and connecting
en
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The appliance may "wander" and tip/
topple from the base when spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 2200, WX 975600,
CZ 110600, Z 7080X0.
On wooden joist floors, install the
Note:
appliance:
In a corner, if possible,
■
On a water-resistant wooden board
■
(min. 30 mm thick) which is screwed
tightly to the floor.
Installation on a platform with
drawer
*
Platform order no.: WMZ 20490, WZ
20490, WZ 20510, WZ 20520.
Installing the appliance in a
kitchenette
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
Recess width of 60 cm required.
■
Only install the appliance
■
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
*
Depending on the model
14
Removing the transport locks
Caution!
Damage to the appliance
The appliance is secured for
■
transportation using transport locks.
If the transport locks are not
removed, the appliance may
become damaged when it is
operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
To prevent transport damage from
■
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.
Hide quick links:
Advertisement
Table of Contents
