Search - Sylvania W6313CB Owner's Manual

2
Select "ALL" or "BLANK"
Press the PLAY/K or STOP/L
button to point to "REPEAT
PLAY".
Press the F.FWD/B or REW/s
button repeatedly until your desired selection [ALL]
or [BLANK] appears.
3
Exit the Repeat Play setting
Press the MENU button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
•
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
•
If the Rental mode is set [ON], the "RENTAL
PLAY B" display has priority.
TO CANCEL THE REPEAT PLAY
MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.

SEARCH

PICTURE SEARCH
This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD or REW button during playback. (in the
SP / LP / SLP modes)
2)Press it again and the TV/VCR will now search in
super high speed. (in the LP / SLP modes only)
NOTE: Tapes recorded in the SP or LP mode will
display a noise bar on the TV screen and the pic-
ture may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
TIME SEARCH
The Time Search function makes it possible to
quickly advance the tape to your desired position
simply by entering the exact amount of playback
time you want to skip.
ZERO RETURN
This function allows you to search easily a beginning
– USER'S SET UP –
point that you want to review by rewinding or fast
RENTAL [OFF]
forwarding.
B REPEAT PLAY [ALL]
AUTO RETURN [OFF]
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape.
1
Rewind or fast forward the tape to the beginning
point at which you want to review.
2
Press the COUNTER RESET button repeatedly.
3
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L button to point to
"ZERO RETURN".
Then, press the F.FWD/B button.
The counter will appear on the TV
screen.
The tape will automatically stop
when the counter returns to 0:00:00.
NOTES:
•
Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
•
This function will not operate in recording mode.
In the example below: To watch a program after 2
hour 50 minutes from the present position, in either
direction.
1
2
Press the TIME SEARCH button (with each push it
will increase by 10 minute).
3
Press the PLAY/K or STOP/L but-
ton until your desired time appears.
(Example: "2:50" stands for 2 hours
50 minutes)
If you wish to cancel the Time Search at this point,
press the MENU button on the remote control.
- 18 -
Stop a tape at your desired point
Reset the counter to 0:00:00
Begin recording or playback
To activate "ZERO RETURN" mode
Insert a tape.
Select "TIME SEARCH" mode
Enter your desired time
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
TIME SEARCH
2 : 50
EN
01A11