Table of Contents
Advertisement
FM MODE
This function enables you to receive the FM radio
wave broadcasting.
1
Set the FM mode
Press the TV/FM button on the
remote control. The radio frequency
appears on the TV screen.
2
Select the radio frequency you want to receive
Press the CHANNEL K or L button until your
desired radio frequency appears.
This TV/VCR will operate with any cassette that has the
recommend the use of high-quality tapes. Do not us poor quality or damaged tapes.
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in
gently, but continuously, on the center-back of the
cassette until it is drawn into the TV/VCR. The
TV/VCR will automatically turn on.
Window
CORRECT
NORMAL PLAYBACK
Make sure ...
•
TV/VCR power must be turned on.
1
Insert a prerecorded tape
If the erase-protection tab has been removed, the
TV/VCR will start playback automatically.
2
To begin playback
Press the PLAY button.
Note: If any menu is activated on
the screen, the PLAY button does
not function. Press the MENU but-
ton to clear the menu. then, press the PLAY button.
If a tape is already on the TV/VCR with power off,
A) Press the PLAY button on the TV/VCR. Power
will automatically turn on and playback will start.
(Direct button operation)
B) Use the remote control;
Press the POWER button to turn the TV/VCR on,
and then press the PLAY button on the remote con-
trol.
NOTES:
•
•
•
FM 88.0 MHz
1)Press the MENU button. Press the PLAY/K or
2)Press the PLAY/K or STOP/L button to point to
PLAYBACK
PRECAUTIONS
•
Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a
warm place or visa versa. Before using a tape with
these conditions, to avoid damage of the tape and
your TV/VCR, wait until the tape has warmed to
room temperature and the moisture has evaporated.
•
Avoid extreme heat, high humidity and magnetic
fields.
•
Do not tamper with the cassette mechanism.
WRONG
•
Do not touch the tape with your fingers.
3
Press the STOP button when play-
back is completed.
The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY B
PLAY button.
ALL REPEAT:
BLANK REPEAT
1
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "USER'S SET UP".
Then, press the F.FWD/B button.
- 17 -
The radio frequency indication repeats to appear
and disappear.
You can not record the FM radio wave broadcast-
ing.
If you receive a weak radio signal, you may change
the FM Antenna mode to INT(internal) or
EXT(external) by following the step below.
STOP/L button to point to "CHANNEL SET UP".
Then, press the F.FWD/B button.
"FM ANTENNA". Select [INT] or [EXT] using
the F.FWD/B or REW/s button.
mark. For best results, we
To stop playback
AUTO REPEAT PLAYBACK
Repeat playback from the beginning
to the end of the tape.
: Repeat playback from the begin-
ning to a blank part, which is blank for more than
10 seconds.
Select "USER'S SET UP"
STOP
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
EN
01A11
Advertisement
Table of Contents
