To Change Clock Setting - Sylvania 6309CE Owner's Manual

5
Select the year
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2004)
Then, press the F.FWD/B button.
6
Select the hour
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Select the minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: 40)
8
Start the clock
Press the MENU button on the
remote control.
Although seconds are not dis-
played, they begin counting from
00 when you press the MENU but-
ton on the remote control. Use this
feature to synchronize the clock with the correct
time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or
STOP/L button.
4)Press the MENU button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
press the F.FWD/B or REW/s button to turn [OFF]
this function. Then you can manually adjust the
clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•
The TV/VCR is turned on.
•
Confirm the TV/VCR is receiving a RF (Radio
Frequency) signal from either an antenna or cable
system connection using the ANT. terminal on the
rear of the TV/VCR.
– MANUAL CLOCK SET –
NOTE:
MONTH DAY YEAR
•
If a cable converter box is being used, make sure it
0 5 / 0 6 THU 2 0 0 4
is powered on.
HOUR MINUTE
•
You must use the TV/VCR remote control to per-
– – : – – – –
form the clock setting procedure.
•
If the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS station
– MANUAL CLOCK SET –
must be selected on the cable box itself, and the
MONTH DAY YEAR
TV/VCR must be set to the output channel of the
0 5 / 0 6 THU 2 0 0 4
cable converter box or satellite box (usually chan-
HOUR MINUTE
nel 3 or 4), to be able to set up or correct the clock
0 5 : – – PM
automatically.
– MANUAL CLOCK SET –
1
Select "SETTING CLOCK"
MONTH DAY YEAR
Press the MENU button on the
0 5 / 0 6 THU 2 0 0 4
remote control.
HOUR MINUTE
0 5 : 4 0 PM
Press the PLAY/K or STOP/L but-
ton to select "SETTING CLOCK".
Press the F.FWD/B button to enter
"SETTING CLOCK" menu.
5:40 PM
2
Set "AUTO CLOCK" to [ON]
Press the F.FWD/B button until
"AUTO CLOCK [ON]" appears.
3
Begin "AUTO CLOCK CH SEARCH"
Press the STOP/L button to select
"AUTO CLOCK CH SEARCH".
Press the F.FWD/B button.
•
The TV/VCR is now searching
for the station which contain the
auto clock set signal. The search
for a signal may take up to 20
seconds per channel.
•
"_ _" appears at the lower left of
the screen when the search has
ended.
•
Auto Clock station- write down
the number(s) that appear on the screen. These are
the auto clock station(s) in your area. See step [4]
on the next page.
•
If no number(s) appear on the TV screen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 11.
Press the MENU button to exit the screen.
NOTE: During Auto Clock CH Search, the picture
may be distorted. This is normal.
- 12 -
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
B AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– SETTING CLOCK –
AUTO CLOCK [ON]
B AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
EN
9J27