To Correct A Program - Sylvania 6309CE Owner's Manual

For every day recording : To record a TV program at
the same time on the same channel every day.
(Example: Monday through Sunday)
Press the STOP/L (down) button
until "EVRY DAY" appears.
Then, press the F.FWD/B but-
ton.
For weekly recording : To record a TV program at
the same time on the same channel every week.
(Example: every Monday)
Press the STOP/L (down) button
until "EVRY" and your desired
day of the week appear together.
Then, press the F.FWD/B but-
ton.
5
Set beginning hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the F.FWD/B button.
6
Set beginning minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: "30" for
7:30PM)
Then, press the F.FWD/B button.
7
Set end hour
Press the PLAY/K or STOP/L but-
ton until the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the F.FWD/B button.
8
Set end minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: "50" for
8:50PM)
Then, press the F.FWD/B button.
9
Set the tape speed
Press the PLAY/K or STOP/L but-
ton until the desired tape speed
appears. (Example: SP)
10
Press the F.FWD/B or REW/s button. The program
is now completed.
– TIMER PROGRAMMING –
CH DATE BEGIN END
•
To set another program, repeat steps [2] to [10].
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
•
Press the MENU button on the remote control to
- - -/- - - - - -:- - -:- - - -
B 61 EVRY DAY -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
return to original mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
11
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
– TIMER PROGRAMMING –
•
You must turn off the TV/VCR to activate automat-
CH DATE BEGIN END
ic timer recording.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
If power is not turned off and you continue watch-
B 61 EVRY MON -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
ing TV, "TIMER REC STANDBY" starts flashing
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
on the TV screen 2 minutes before the programmed
start time.
– TIMER PROGRAMMING –
CH DATE BEGIN END
To shift the time schedule of an automatic timer
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
recording.
- - -/- - - - - -:- - -:- - - -
P
B 61 7/05 MON 7:12 -:- - - -
M
- - -/- - - - - -:- - -:- - - - 1)Press the POWER button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
2)Repeat step [1] on page 20.
- - -/- - - - - -:- - -:- - - -
3)Press the RECORD button and select the desired
program using the PLAY/K or STOP/L button.
– TIMER PROGRAMMING –
4)Press the RECORD button again.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
Each additional push will shift forward the
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P
begin/end time for recording by 10 minutes. When
B 61 7/05 MON 7:30 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
the recording is already in progress, each additional
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
push will shift forward the end time only. If you
want to cancel while setting, press the
PAUSE/STILL button on the remote control. The
recording time returns to the original time.
– TIMER PROGRAMMING –
CH DATE BEGIN END
NOTE: When you shift forward the time schedule
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
during recording, the recording speed will automati-
- - -/- - - - - -:- - -:- - - -
P
B 61 7/05 MON 7:30 8:30 - -
M
cally be set to the SLP mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
5)Press the F.FWD/B or REW/s button to exit the
- - -/- - - - - -:- - -:- - - -
setting menu. Then press the MENU button on the
remote control to return to original mode.
– TIMER PROGRAMMING –
CH DATE BEGIN END

TO CORRECT A PROGRAM

- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
•
While setting a program; press the REW/s but-
P
B 61 7/05 MON 7:30 8:50 - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
ton to go back one step and enter the correct num-
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
bers using the PLAY/K or STOP/L button.
•
After setting a program;
1)Press the POWER button.
– TIMER PROGRAMMING –
2)Repeat steps [1] - [2] on page 20.
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
3)Press the F.FWD/B button (or press the REW/s
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P
B 61 7/05 MON 7:30 8:30 SP
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
4)Press the POWER button to set automatic timer
- 21 -
Finish setting the program
Set the timer
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/K or STOP/L but-
ton.
recording.
EN
9J27