To Change Clock Setting - Sylvania 6313CE Owner's Manual

In the example below, the clock is to be set to:
DATE May 6th, 2004
SETTING TIME 5:40PM
1
Select "SETTING CLOCK"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L
button to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2
Select "MANUAL CLOCK SET"
Press the PLAY/K or STOP/L
button to point to "MANUAL
CLOCK SET".
Then, press the F.FWD/B button.
3
Select the month
Press the PLAY/K or STOP/L
button until your desired month
appears. (Example: May → 05)
Then, press the F.FWD/B button.
4
Select the day
Press the PLAY/K or STOP/L but-
ton until your desired day appears.
(Example: 6th → 06)
Then, press the F.FWD/B button.
5
Select the year
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2004)
Then, press the F.FWD/B button.
6
Select the hour
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Select the minute
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: 40)
8
Press the MENU button on the
remote control.
Although seconds are not displayed,
they begin counting from 00 when
you press the MENU button on the
– M E N U –
remote control. Use this feature to
TIMER PROGRAMMING
PICTURE CONTROL
synchronize the clock with the correct time.
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
NOTE:
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
When unplugging the AC cord or if there is a power
ZERO RETURN
TIME SEARCH
failure for more than 3 seconds, you may have to
reset the clock.

TO CHANGE CLOCK SETTING

– SETTING CLOCK –
AUTO CLOCK [ON]
If you want to change the clock,
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
B MANUAL CLOCK SET
1)Follow steps [1] and [2].
D.S.T. [OFF]
2)Select where you want to change using the
F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or
STOP/L button.
– MANUAL CLOCK SET –
4)Press the MENU button on the remote control to
MONTH DAY YEAR
0 5 / – – – – – – – – – start the clock.
HOUR MINUTE
– – : – – – –
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
– MANUAL CLOCK SET –
press the F.FWD/B or REW/s button to turn [OFF]
MONTH DAY YEAR
this function. Then you can manually adjust the
0 5 / 0 6 – – – – – – –
clock.
HOUR MINUTE
– – : – – – –
AUTOMATIC CLOCK SETTING
Make sure ...
•
The TV/VCR is turned on.
– MANUAL CLOCK SET –
•
Confirm the TV/VCR is receiving a RF (Radio
MONTH DAY YEAR
Frequency) signal from either an antenna or cable
0 5 / 0 6 THU 2 0 0 4
system connection using the ANT. terminal on the
HOUR MINUTE
– – : – – – – rear of the TV/VCR.
NOTE:
•
If a cable converter box is being used, make sure it
– MANUAL CLOCK SET –
is powered on.
MONTH DAY YEAR
•
You must use the TV/VCR remote control to per-
0 5 / 0 6 THU 2 0 0 4
form the clock setting procedure.
HOUR MINUTE
•
If the TV/VCR is connected directly to a cable
0 5 : – – PM
converter box or satellite box, the local PBS station
must be selected on the cable box itself, and the
TV/VCR must be set to the output channel of the
– MANUAL CLOCK SET –
cable converter box or satellite box (usually chan-
MONTH DAY YEAR
nel 3 or 4), to be able to set up or correct the clock
0 5 / 0 6 THU 2 0 0 4
automatically.
HOUR MINUTE
0 5 : 4 0 PM
- 11 -
Start the clock
5:40 PM
EN
9I03