Sleep Timer; Maintenance - Sylvania 3819LC Owner's Manual

3
Set wake up time
Press the PLAY/ or STOP/
button until to point to "TIME".
Press the F.FWD/B or REW/s
button until your desired wake
up time appears.
Each additional push will
increase (or decrease) the time by 10 minutes.
4
Exit the Wake Up Timer setting
Press the MENU button to return to TV mode.
TO CANCEL THE WAKE UP TIMER
Repeat step [1] but select [OFF].
CABINET CLEANING
Wipe the front panel and other exterior surfaces of
the TV/VCR with a soft cloth immersed in lukewarm
water and wrung dry.
Never use a solvent or alcohol. Do not spray
insecticide liquid near the TV/VCR. Such chemicals
may cause damage and discoloration to the exposed
surfaces.
HEAD CLEANING
Picture playback may become blurred or interrupted
while the TV program reception is clear.
Dirt accumulated on the video heads after long periods
of use, or the usage of rental or worn tapes can cause
The Sleep Timer function turns off the TV/VCR without
using the POWER button after a desired period of time.
NOTE:
WAKE UP ON/OFF [ON]
TIMER TV/TAPE [TV]
B TIME
[12:00AM]
Press the WAKE UP/SLEEP button on the remote con-
trol until "SLEEP TIMER" appears.
Press the PLAY/ , STOP/ ,
F.FWD/B or REW/s button
until your
desired sleep time appears.
Each additional push will in-
crease the time by 30
minutes up to 120 minutes.
Press the MENU button to exit the Sleep Timer setting.
TO CANCEL THE SLEEP TIMER
Press the WAKE UP/SLEEP button on the remote
control until "SLEEP TIMER" appears.
Then, press the PLAY/ , STOP/ , F.FWD/B or
REW/s button and select [OFF].
To view the time left for sleep timer press the WAKE
UP/SLEEP button twice then the MENU button to exit
the sleep timer setting.

MAINTENANCE

SERVICING
- 27 -

SLEEP TIMER

This function does not operate during Recording
mode.
1
Select "SLEEP TIMER"
2
Set sleep time
this problem. In this case, video head cleaning
requires highly technical attention, therefore consult
the nearest our Authorized Service Center. Clean
heads only when problems occur.
Should your TV/VCR become inoperative, do not try
to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and take the unit to the nearest our
Authorized Service Center for servicing. To locate
an authorized service center, please call 1-800-968-
3429.
SLEEP TIMER [2:00]
EN
7L26