Hints For Automatic Timer Recording; Auto Return; Wake Up Timer - Sylvania 3819LC Owner's Manual

TO CHECK THE BEGIN/END TIME
1) Press the POWER button so that the REC indicator
goes off.
2) Press the MENU button.
3) Confirm "TIMER PROGRAMMING" is pointed.
4) Press the F.FWD/B button. The details of programs
appear on the TV screen.
5) Press the MENU button to return to TV mode.

HINTS FOR AUTOMATIC TIMER RECORDING

Make sure the channel you want to record is properly
set in advance.
It is not necessary to press the RECORD button for
timer recording.
Recording begins automatically at the Start time.
If you are recording using a Timer mode, you may
not operate the unit manually.
The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
If the tape runs out before the end time, the TV/VCR
will switch to the Stop mode immediately, and the
tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished, the
beginning of the recorded program(s) can be searched
for automatically.
Use the remote control for this procedure.
1
Select "USER'S SET UP"
Press the MENU button.
Press the PLAY/ or STOP/
button to point to "USER'S SET
UP".
Then, press the F.FWD/B button.
2
Set "AUTO RETURN" to [ON]
Press the PLAY/ or STOP/
button to point to "AUTO RE-
TURN".
Press the F.FWD/B or REW/s
button until [ON] appears.
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTE:
Press the PLAY button.
TO CANCEL THE AUTO RETURN
MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button.
If there is a power failure of any kind, the unit will
retain its' memory for this feature.
The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired period
of time.
NOTES:
Press the WAKE UP/SLEEP
button once, and confirm
– M E N U –
"ON/OFF" is pointed.
TIMER PROGRAMMING
PICTURE CONTROL
Press the F.FWD/B or REW/s
SETTING CLOCK
CHANNEL SET UP
B
USER'S SET UP
button until [ON] appears.
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
Press the PLAY/
button
"TV/TAPE".
Press the F.FWD/B or REW/s
– USER'S SET UP –
button, and select [TV] or
RENTAL [OFF]
[TAPE].
REPEAT PLAY [OFF]
B
AUTO RETURN [ON]
- 26 -
3
Auto Return will begin
If you press the POWER button while tape is rewinding,
the Auto Return will stop.
4
Watch the recorded program

WAKE UP TIMER

Use the remote control for this procedure.
Clock must be set to the correct time before setting
the timer.
If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1
Select "WAKE UP TIMER"
2
Select "TV" or "TAPE"
or STOP/
until to point to
WAKE UP B ON/OFF
[ON]
TIMER TV/TAPE [TV]
TIME [12:00AM]
WAKE UP ON/OFF [ON]
B TV/TAPE [TV]
TIMER
TIME [12:00AM]
EN
7L26