Picture Control; Back Light Setting; Sleep Timer - Sylvania SSL15D6 Owner's Manual

POWER PICTURE SELECT EJECT
3
7 8 9
SLEEP +100
0 +10
SKIP
ZOOM
PLAY
REV FWD
STOP
PAUSE SLOW
DISPLAY
ENTER
SETUP TITLE RETURN
CLEAR SEARCH MODE REPEAT
AUDIO SUBTITLE ANGLE
MODE
•
Shaded buttons are used for following operation.

PICTURE CONTROL

The unit's picture controls, brightness, contrast,
color, tint and sharpness, are preset to factory speci-
fications. Although they are usually the best, you
may need to make some further adjustments for a
more natural looking image.
1
Press [PICTURE] then press [K] or [L] to
select the desired control "BRIGHTNESS",
"CONTRAST", "COLOR", "TINT" or "SHARP-
NESS".
PICTURE
2
Press [s] or [B] to adjust to your desired
level within 5 seconds.
BRIGHTNESS to decrease
brightness
CONTRAST to decrease
contrast
COLOR
to pale
TINT to purple
SHARPNESS to soft
•
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
NOTE
•
The picture control display will disappear automati-
cally after 10 seconds unless you press any buttons.
VOL.
MUTE
DISC
MENU
A-B
BRIGHTNESS
- +
to increase
brightness
to increase
contrast
to brilliant
to green
to clear

BACK LIGHT SETTING

1
Press [SETUP] then press [K] or [L] to point
to "BACK LIGHT".
SETUP
2
Press [ENTER] then press [s] or [B] to
select to "BRIGHT", "NORMAL" or "DARK".
ENTER
3
Press [SETUP].
SETUP

SLEEP TIMER

The Sleep Timer function turns off the unit without
using [POWER] after a desired period of time.
1
Press [SLEEP].
SLEEP
2
Press [SLEEP] repeatedly until the desired
sleep time is displayed.
SLEEP
•
Each press increases the time by 10 minutes up
to 90 minutes.
•
After 5 seconds, the Sleep Timer setting will
disappear automatically.
•
If you select "SLEEP 0 MINUTE", Sleep Timer
setting is canceled.
- 13 - - 13 -
- TV SET UP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B BACK LIGHT [BRIGHT]
SLEEP 0 MINUTE
EN EN