Table of Contents
Advertisement
Quick Links
OWNER'S
MANUAL
COLOR TV/DVD/VHS
SSC719C
SSC727C
This Owner's Manual is
made of recycled paper.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
As an E
S
NERGY
TAR
Partner, our company has
determined that this product meets
the E
S
®
guidelines for
NERGY
TAR
energy efficiency. E
S
NERGY
a U.S. registered mark.
®
If you need additional operating assistance after reading this owner's
manual or to order replacement accessories, please call
®
is
TAR
TOLL FREE : 1-800-968-3429.
(19 inch)
(27 inch)
Please read before using this equipment
SUPPLIED ACCESSORIES
ACCESSORIES
Remote Control Unit
NE200UD
Batteries
2 AA Batteries
PART NO.
Advertisement
Table of Contents
Related Manuals for Sylvania SSC719C
Summary of Contents for Sylvania SSC719C
- Page 1 OWNER’S MANUAL COLOR TV/DVD/VHS SSC719C SSC727C This Owner’s Manual is made of recycled paper. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. ® As an E NERGY Partner, our company has determined that this product meets the E ® guidelines for NERGY ® energy efficiency. E NERGY a U.S.
-
Page 2: C Important Safeguards
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. - Page 3 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE NEC - NATI O NAL EL ECTRI CAL CO DE S2 8 9 8 A 13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/DVD/VHS, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
-
Page 4: C Precautions
IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public perfor- mance and lending of discs are prohibited. FCC WARNING- This equipment may gener- ate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction man- ual. -
Page 5: Location
LOCATION For safe operation and satisfactory performance of your TV/DVD/VHS, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. •... -
Page 6: Table Of Contents
C IMPORTANT SAFEGUARDS ..2 C PRECAUTIONS ....4 LOCATION ....5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . -
Page 7: C Features
TV/VCR • The Hi-Fi stereo recording system Hi-Fi system– offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter. • Rotary 4-head Record/Playback System– ensure excellent picture quality and special effects playback. •... - Page 8 ¡ Dolby Digital surround This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder. ¡ Still/fast/slow/step playback Various playback modes are available including still pic- tures, fast forward/reverse, slow motion and step frames. ¡...
-
Page 9: C Operating Controls And Functions
OPERATING CONTROLS AND FUNCTIONS - TV/DVD/VHS FRONT PANEL - [Fig.1] DVD buttons POWER VOLUME SKIP PLAY SEARCH - REMOTE CONTROL - POWER PICTURE SLEEP SELECT PAUSE +100 SPEED C.RESET ZOOM (DVD) PLAY (TV/VCR) STOP RECORD DISPLAY ENTER SETUP TITLE RETURN CLEAR SEARCH MODE REPEAT... - Page 10 - TV/DVD/VHS REAR PANEL - [Fig.3] ANT. AUDIO L/R input jacks Connect to the audio output jacks of a video camera or VCR. Cassette compartment PICTURE button Press to adjust the picture. Number buttons TV Mode: [P.15] Press two digits to directly access the desired channel.
-
Page 11: C Preparation For Use
ANT. in jack Connect to an antenna, cable system, or satellite system. Power cord Connect to a standard AC outlet (120V/60Hz). Remove the power cord from the hook to NOTE: avoid breaking a wire before you connect to a standard AC outlet. PREPARATION FOR USE ANTENNA/CABLE CONNECTION Satellite Box or... -
Page 12: Connecting To External
TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL 1. Set the TV/DVD/VHS channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. Note to CATV system installer: This reminder is provided to call the CATV sys- tem installer’s attention to Article 820-40 of the... -
Page 13: Connecting To A Stereo System (For Dvd)
CONNECTING TO A STEREO SYSTEM (for DVD) Stereo system NOTES: • Be sure to turn off the power to all components in the system before connecting another component. • Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the TV/DVD/VHS. -
Page 14: Connecting To A Dolby Digital Decoder
CONNECTING TO A DOLBY DIGITAL DECODER, DTS DECODER, OR MPEG DECODER (for DVD) If using this TV/DVD/VHS to play back a TV/DVD/VHS in a 5.1 channel Dolby Digital surround, DTS sur- round, or MPEG surround format, the TV/DVD/VHS outputs a Dolby Digital, DTS, or MPEG data stream from its COAXIAL DIGITAL AUDIO OUT jack. -
Page 15: C Set Up For Use
You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. -
Page 16: Channel Set Up Again
CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/DVD/VHS. Select “CHANNEL SET UP” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “CHANNEL SET UP”. Then, press the Arrow B button. -
Page 17: Clock Set Up (Auto / Manual)
CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SET- TING”. If it is not, follow “MANUAL CLOCK SET- TING”. AUTO CLOCK SETTING You can have the TV/DVD/VHS set the clock auto- matically by using the Public Broadcasting Station... -
Page 18: Manual Clock Setting
MANUAL CLOCK SETTING Make sure ... • TV/DVD/VHS power must be turned on. Select “SETTING CLOCK” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “SETTING CLOCK”. Then, press the Arrow B button. Select “MANUAL CLOCK SET”... -
Page 19: C Tv Operation
WATCHING A TV PROGRAM Turn on the TV/DVD/VHS Press the POWER button to turn on the TV/DVD/VHS. Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/DVD/VHS is connected to a cable box or satellite box, the TV/DVD/VHS must be on CH3 or CH4, then the channel to be viewed must... -
Page 20: Closed Caption System
CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display. By choosing the caption mode, you CAPTION mode: can watch dramas, movies and news while captioning the dialogues and the contents of news. -
Page 21: V-Chip Set Up
V-CHIP SET UP V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets the limitations you select. -
Page 22: Mpaa Rating Set Up
MPAA RATING SET UP Make sure ... • TV/DVD/VHS power must be turned on. Select “V-CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “V-CHIP SET UP”. Then, press the Arrow B button. Use the number buttons to enter 4- digit access code. -
Page 23: C Mts(Multi-Channel Television Sound)System
MTS(Multi-Channel Television sound)SYSTEM You can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcast on the tuner channel you are watching, TV/DVD/VHS the status shown below will appear when you press the DISPLAY button on the remote control. -
Page 24: Selecting The Mts System
SELECTING THE MTS SYSTEM Make sure ... • TV/DVD/VHS power must be turned on. TO SELECT HIFI MODE Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow K or L button to point to “USER’S SET UP”. Then, press the Arrow Bbutton. -
Page 25: Video Cassette
This TV/DVD/VHS will operate with any cassette that has the we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. -
Page 26: C C Playback
NORMAL PLAYBACK Make sure ... • TV/DVD/VHS power must be turned on. Insert a prerecorded tape If the erase-protection tab has been removed, the TV/DVD/VHS will start playback automatically. To begin playback Press the PLAY button. To stop playback Press the STOP button when play- back is completed. -
Page 27: C Special Playback
Make sure ... • TV/DVD/VHS power must be turned on. • Insert a prerecorded tape. • Before playback, follow steps below. RENTAL PLAYBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. Select “USER’S SET UP”... -
Page 28: C Search
Make sure ... • TV/DVD/VHS power must be turned on. • Insert a tape. ZERO RETURN This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. -
Page 29: C Special Features
INDEX SEARCH This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR. -
Page 30: C Recording
Make sure ... • TV/DVD/VHS power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: •... -
Page 31: Otr (One Touch Recording)
OTR (One Touch Recording) This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/DVD/VHS. Make sure ... • TV/DVD/VHS power must be turned on. • Insert a cassette tape with its erase prevention tab in place. -
Page 32: C Timer
AUTOMATIC TIMER RECORDING You may set the TV/DVD/VHS to start and end a recording while you are away. You can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: July 6th, 2001 SETTING TIME: from 7:30PM to 8:50PM... -
Page 33: Timer Program Extension
Set beginning hour Press the Arrow K or L button until the desired hour appears. (Example: “ 7, PM” for 7:30PM) Then, press the Arrow B button. Set beginning minute Press the Arrow K or L button until the desired minute appears. (Example: “30”... -
Page 34: Hints For Automatic Timer Recording
TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the Arrow B button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode. -
Page 35: C On Screen Display
To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: •... -
Page 36: C About The Discs
DVD SECTION PLAYABLE DISCS The following discs can be played back on this DVD player. Disc Type Logo Contents Sound Video Pictures Audio Sound This player conforms to the NTSC color system. You can- not play discs recorded in other color systems such as PAL or SECAM. -
Page 37: C Playing A Disc
PLAYING A DVD VIDEO OR AN AUDIO CD Getting started Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.) Press the POWER button. -
Page 38: Resuming Playback From The Point Where Playback Stopped
RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED Press the STOP button during playback. ¡ Playback will stop, and then appear the resuming message at the center. Press the PLAY button. Playback will start from the point where the previous playback session was stopped. -
Page 39: Slow Motion
SLOW MOTION Press and hold the button for more than 1 second while playback is paused. (Sound remains muted.) ¡ Slow motion mode will be activated. ¡ Pressing and holding the g button for more than 1 second cycles the playback speed in three steps. Select an appropriate speed while referring to the speed indication on the screen. -
Page 40: Repeat
REPEAT Press the REPEAT button. For DVDs ¡ A single title or chapter is played back repeatedly. ¡ Pressing the REPEAT button cycles the display on the screen as follows. REPEAT [OFF] REPEAT [CHAPTER] REPEAT [TITLE] For audio CDs ¡ The whole disc or a single track is played back repeatedly. -
Page 41: Marker
MARKER You can define the part to be called back. Press the SEARCH MODE button three times during playback. Set the marker ¡ Using the cursor (s/ B) button, position the cursor on to the marker number shown as “NOT SET”. Press the ENTER button when the screen to be reviewed appears. -
Page 42: Random (Audio Cd)
RANDOM (Audio CD) Press the MODE button in stop mode. ¡ The program setting menu screen will appear. Press the MODE button again. Press the PLAY button. Random playback will then start. Note ¡ Program playback is not available during random playback. -
Page 43: Changing The Onscreen Display During Mp3 Disc Play
Press the PLAY button. ¡ Playback will start. To stop the play, press the STOP button. CHANGING THE ONSCREEN DISPLAY DURING MP3 DISC PLAY The information on an MP3 disc in play can be checked. Press the DISPLAY button during playback. ¡... -
Page 44: Playing An Mp3 Disc At Random
PLAYING AN MP3 DISC AT RANDOM Press the MODE button twice in STOP mode. ¡ The random setting menu screen will appear. RANDOM START: PLAY EXIT: MODE Press the PLAY button. ¡ Random play starts. CHANGING THE AUDIO LANGUAGE OR SOUND MODE The DVD player has a function which allows you to select the desired audio language and sound mode. -
Page 45: Changing The Subtitle Language
CHANGING THE SUBTITLE LANGUAGE The DVD player has a function which allows you to select the desired language for subtitles. Press the SUBTITLE button during playback, and then press the SUBTITLE button to select the desired subtitle language. ¡ The subtitle language can be changed if the subtitles are recorded in multiple languages on the DVD being played. -
Page 46: Changing The On-Screen Display
CHANGING THE ON-SCREEN DISPLAY You can check the information about the disc by pressing the DISPLAY button on the remote control. For DVDs Press the DISPLAY button during playback. CH 7/49 0:01:46 - 0:03:27 CH(Chapter): Current chapter number / the number of total chapter. -
Page 47: C Changing The Setup Items
CHANGING THE SETUP ITEMS LANGUAGE SETTINGS Press the SETUP button in STOP mode. ¡ The setup screen appears. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT: SET: ENTER EXIT: SETUP CANCEL: RETURN Press the buttons to select Language, and then press the ENTER button. SET-UP 1.LANGUAGE 2.DISPLAY... -
Page 48: Display Settings
DISPLAY SETTINGS Press the SETUP button in STOP mode. ¡ The setup screen will appear. Press the buttons to select DISPLAY and then press the ENTER button. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL Press the buttons to select an item, and then press the ENTER button. -
Page 49: Audio Settings
AUDIO SETTINGS Press the SETUP button in STOP mode. ¡ The setup screen will appear. Press the buttons to select Audio and then press the ENTER button. Press the buttons to select an item, and then press the ENTER button. DRC (Default : OFF) On : DRC (Dynamic Range Control) -
Page 50: Parental Lock
PARENTAL LOCK Press the SETUP button. ¡ The setup screen will appear. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL SELECT: SET: ENTER EXIT: SETUP CANCEL: RETURN Press the buttons to select PARENTAL, and then press the ENTER button. SET-UP 1.LANGUAGE 2.DISPLAY 3.AUDIO 4.PARENTAL Press the numeric buttons to enter the 4- digit password, and then press the ENTER... -
Page 51: C Language Code List
Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali;Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish [DAN] German [GER] Bhutani Greek [GRE] English [ENG] Esperanto Spanish [SPA] Estonian Basque Persian Finnish [FIN] Fiji Faroese French [FRE] Frisian Irish [IRI]... -
Page 52: Troubleshooting Guide
TROUBLESHOOTING GUIDE TV/VCR Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money. PROBLEM No power. Remote Control Doesn’t Work No picture and sound. - Page 53 PROBLEM Playback picture is partially noisy. No picture but the audio is OK in playback. No operation by infrared Remote Control. Video or color fades in and out when making a copy of a video tape. Uneven color CLOSED CAPTION PROBLEM My TV/DVD/VHS is showing captions that are misspelled.
- Page 54 If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the player, consulting the following checklist. Symptom • No power. Loose power plug. • The player does not The remote control is not aimed •...
-
Page 55: C Maintenance
CABINET CLEANING • Wipe the front panel and other exterior surfaces of the TV/DVD with a soft cloth immersed in luke- warm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces. -
Page 56: Specifications
GENERAL SPECIFICATIONS TV/VCR [19 inch model]: 19 inch in-line gun, 90˚ deflection tube [27 inch model]: 27 inch in-line gun, 110˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. - Page 57 MEMO – 57 – 01A11...
-
Page 58: Vista Posterior
INDICE I CONTROLES DE OPERACIÓN Y FUNCIONES ..58 PANEL FRONTAL DEL televisor/DVD/VHS ..58 MANDO A DISTANCIA ......58 VISTA POSTERIOR . - Page 59 Botones de números Modo del televisor: Pulse dos dígitos para tener acceso directamente al canal deseado. Recuerde pulsar "0" antes de elegir un canal de un solo dígito. Botón +100 Púlselo para seleccionar canales de televisión por cable cuyo número sea igual o superior al 100. Modo DVD: Púlselo para introducir el número deseado.
- Page 60 PREPARACIÓN PARA LA UTILIZACIÓN CONEXIONES DE ANTENA/ TELEVISIÓN POR CABLE Consulte la figura 4 de la página 11 ANTENAS SEPARADAS DE VHF/UHF En algunas áreas será necesario utilizar una antena exterior. Consulte la figura 4 de la página 11 TELEVISIÓN POR CABLE SIN CAJA DE CONVERTIDOR/DECODIFICADOR Utilice esta conexión si su sistema de televisión por cable se conecta directamente a su...
- Page 61 NOTAS: • La fuente de audio de un disco del formato de sonido ambiental Dolby Digital de 5,1 canales no puede ser grabada como sonido digital por una platina MD o DAT. • Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de hacer la conexión a otro componente.
- Page 62 TV SECTION PREPARACIÓN PARA LA UTILIZACIÓN PREPARACIÓN DE CANALES POR PRIMERA VEZ Conecte el cable de alimentación a una toma de CA convencional. NOTA: Si aparecen algunos dígitos en la esquina de la pantalla, pulse el botón POWER sin des- enchufar el cable de alimentación.
- Page 63 DVD SECTION REPRODUCCIÓN DE UN DISCO REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE AUDIO Para empezar Conecte la alimentación del televisor, amplificador y cualquier otro componente que esté conectado al reproductor DVD. (Cambie el sistema de entrada para adaptarlo al reproductor DVD, y compruebe que el volumen del sonido sea correcto.) Pulse el botón POWER.
-
Page 64: C Warranty
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.