Table of Contents
Advertisement
TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the RECORDING
indicator goes off.
2)Press the SETUP button on the remote control.
3)Confirm "TIMER PROGRAMMING" is pointed.
4)Press the ENTER button. The details of programs
appear on the TV screen.
5)Press the SETUP button on the remote control to
return to TV mode.
HINTS FOR AUTOMATIC
TIMER RECORDING
•
Make sure the channel you want to record is prop-
erly set in advance.
•
It is not necessary to press the RECORD button for
timer recording.
•
Recording begins automatically at the Start time.
•
You may watch TV or watch a DVD while a timer
recording is occurring. To watch the same TV channel
that VCR is recording, press the POWER button and
then press the SELECT button to select TV. To view a
DVD, press the POWER button and then press the
SELECT button to select DVD. Press the POWER but-
ton to turn the display off and keep the timer recording
going.
•
The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•
If the erase-prevention tab is removed, the cassette will
be ejected when the POWER button is pressed to off.
•
If the tape runs out before the end time, the
TV/DVD/VCR will switch to the Stop mode
immediately, and the tape will be ejected.
AUTO RETURN
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "USER'S SET UP".
Then, press the ENTER button.
2
Press the Arrow button K or L to
point to "AUTO RETURN".
Press the ENTER button until [ON]
appears.
3
When all the timer recordings are completed, the
TV/DVD/VCR will rewind to the beginning of the
recorded program(s).
NOTE:
•
If you press the POWER button while tape is
TV/VCR
rewinding, the Auto Return will stop.
4
Press the PLAY button.
TO CANCEL THE AUTO RETURN
MODE
Repeat steps [1] and [2], select [OFF] using the
ENTER button.
If there is a power failure of any kind, the
TV/VCR/DVD will retain its memory for this fea-
ture.
The Sleep Timer function turns off the
TV/DVD/VCR without using the POWER button
after a desired period of time.
NOTE:
•
This function does not operate during Recording
mode.
1
Press the SLEEP button on the remote control until
TV/VCR
"SLEEP TIMER" appears.
2
Press the SLEEP button until your
desired sleep time appears.
Each additional push will increase
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
the time by 30 minutes up to 120
CHANNEL SET UP
B USER'S SET UP
minutes.
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
After 5 seconds, exit the Sleep Timer setting.
ZERO RETURN
TIME SEARCH
INDEX SEARCH
TO CANCEL THE SLEEP TIMER
Press the SLEEP button on the remote control until
"SLEEP TIMER" appears. Press the SLEEP button
until "SLEEP 0 MINUTES" appears.
- 34 -
Set "AUTO RETURN" to [ON]
Auto Return will begin
Watch the recorded program
SLEEP TIMER
Select "SLEEP TIMER"
Set sleep time
– USER'S SET UP –
RENTAL
[OFF]
REPEAT PLAY
[OFF]
B AUTO RETURN
[ON]
VCR AUDIO
[HIFI]
TV AUDIO
[STEREO]
TV/VCR
SLEEP 120 MINUTES
EN
1C29
Advertisement
Table of Contents
