Hints For Automatic Timer Recording; Auto Return; Sleep Timer - Sylvania 19 Inch 6719DC Owner's Manual

TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the REC indicator
goes off.
2)Press the SETUP button on the remote control.
3)Confirm "TIMER PROGRAMMING" is pointed.
4)Press the Arrow B button. The details of programs
appear on the TV screen.
5)Press the SETUP button on the remote control to
return to TV mode.
HINTS FOR AUTOMATIC
TIMER RECORDING
•
Make sure the channel you want to record is prop-
erly set in advance.
•
It is not necessary to press the RECORD button for
timer recording.
•
Recording begins automatically at the Start time.
•
If you are recording using a Timer mode, you may
not operate the unit manually.
•
The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•
If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
•
If the tape runs out before the end time, the
TV/DVD/VHS will switch to the Stop mode imme-
diately, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow K or L button to
point to "USER'S SET UP".
Then, press the Arrow B button.
2
Set "AUTO RETURN" to [ON]
Press the Arrow K or L button to
point to "AUTO RETURN".
Press the Arrow B or s button
until [ON] appears.
3
When all the timer recordings are completed, the
TV/DVD/VHS will rewind to the beginning of the
recorded program(s).
NOTE:
•
If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4
Press the PLAY button.
TO CANCEL THE AUTO RETURN
MODE
Repeat steps [1] and [2], select [OFF] using the
Arrow B or s button.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The Sleep Timer function turns off the
TV/DVD/VHS without using the POWER button
after a desired period of time.
NOTE:
•
This function does not operate during Recording
mode.
1
Press the SLEEP button on the remote control until
"SLEEP TIMER" appears.
2
Press the SLEEP button until your
desired sleep time appears.
Each additional push will increase
- TV/VCR SETUP -
TIMER PROGRAMMING
the time by 30 minutes up to 120
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
minutes.
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
After 5 seconds, exit the Sleep
ZERO RETURN
TIME SEARCH
INDEX SEARCH
Timer setting.
TO CANCEL THE SLEEP TIMER
Press the SLEEP button on the remote control until
– USER'S SET UP –
"SLEEP TIMER" appears. Press the SLEEP button
until "SLEEP 0 MINUTES" appears.
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
VCR AUDIO [HIFI]
TV AUDIO [STEREO]
- 34 -
Auto Return will begin
Watch the recorded program

SLEEP TIMER

Select "SLEEP TIMER"
Set sleep time
SLEEP 120 MINUTES
EN
1C29