Fast Forward/Reverse; Slow Motion; Starting From A Desired Track; Starting From A Desired Time Count - Sylvania SRDVC2019 Owner's Manual

FAST FORWARD/REVERSE

1
Press the FWD g or REV h
g
playback. (The sound for DVD is muted.)
•
For DVDs, pressing the FWD g or REV h
button cycles the playback speed in three steps.
•
For audio CDs, the playback speed is fixed.
REV Button
E
E
E
E
2
Press the PLAY button to return to normal
playback speed.

SLOW MOTION

1
Press the FWD g g button while playback is
paused. (Sound remains muted.)
•
Slow motion mode will be activated.
•
Pressing the FWD g button cycles the playback
speed in three steps. Select an appropriate speed
while referring to the speed indication on the
screen.
2
Press the PLAY button to return to normal
playback speed.
NOTES:
•
Slow playback is not available with audio CDs.
•
The reverse of slow playback is not available.
STARTING FROM A DESIRED
TRACK
DVD
h button during
FWD Button
D
x2
x2
D
x8 x8
D
x32 x32
D
FWD D Button
1/16
1/8
1/2
1
Press the number buttons to enter the desired
track number.
•
The selected track will be located, and playback
CD
will start.
You can also press the SEARCH MODE button, use
the number or K/L buttons to enter the track number,
and then press the PLAY button.
Pressing the SEARCH MODE but-
ton during playback causes the cur-
rent track number to be displayed in
square brackets.
TRICKS WITH THE SKIP BUTTONS (H, G)
If the SKIP button G is pressed during playback
or while playback is paused, the current track is
skipped and the next track is played. When the
SKIP button H is pressed once, the top of the cur-
rent track is located for replaying. When the SKIP
button H is pressed again while playback is
paused, the previous track is located. Each time the
SKIP button H is pressed while playback is
paused, the disc is searched backward track by
track. Once playback has started, pressing the SKIP
button H locates the top of the current track.
DVD
STARTING FROM A DESIRED
1
Press the SEARCH MODE
button.
•
Press the button three times for
DVDs or two times for audio
CDs.
2
Press the number buttons to set the desired
time count.
•
Example: 1 hour, 23 minutes and
30 seconds
1 +10 +10 3
+10 +10 +10 0
•
To enter 0 (zero), press the num-
ber 0 (zero) button or press the B button.
3
Press the PLAY button. Playback will then
start from the set time count.
NOTES:
•
Playback from a desired time count is not available
with some discs.
•
Specific time playback is not available with some
CD discs or if the unit is in stop mode.
- 23 -
TIME COUNT
DVD
SEARCH/TRACK
TOTAL TRACKS: 07
TRACK [ 6 ] _
Start Exit
CD
SEARCH/TIME
TOTAL TIME 1h23m45s
TIME [ _h__m__s ]
Start Exit
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h23m30s]
_
Start Exit
EN
0C28