Display; Device - Volkswagen 3C0 051 435 TA Operating Instructions Manual

20

7.3 Display

Sleep mode:
The sleep mode can be activated for the screen to avoid blinding effects, e. g. when driving in the night.
When the sleep mode is switched on, the screen is turned off according to the set time. The screen is
reactivated by touching or automatically with an incoming call.
Brightness:
In the brightness menu, the brightness of the screen can be changed. The settings can be carried out
separately for the day or the night mode.
Day / night modes:
The display of the touchscreen can be switched manually for the use by day or during the night. In
automatic mode, this setting is controlled automatically by the sensor integrated in the operating unit.
The automatic mode is activated ex-factory.
Calibration:
If the touchscreen commands are not carried out correctly, the touchscreen must be re-calibrated. A
cross appears on the touchscreen after you have started the calibration . Touch the cross as
accurately as possible and repeat the procedure until the calibration has been completed.

7.4 Device

Accepting calls:
The accepting of calls can be carried out manually or automatically depending on the settings in the
menu. With the automatic call accepting, the call is accepted after the third ring.
Language:
The language for the screen display of the Touch Adapter is selected in the menu.
Telephone book options:
After turning on the Touch Adapter and the successful coupling of the mobile telephone, the data is
transferred from the telephone book (SIM card) and the address book (telephone memory) to the Touch
Adapter.
Using the function load telephone book, the telephone book can be manually calibrated again.
The sorting of the telephone book entries can be performed alphabetically according to the names or
surnames. Using the reverse names pushbutton, you can switch the sorting of the names to surnames.
System:
In the menu system, under Version Info you can check the software version installed.
If desired or necessary, a new software version can be updated by an authorised stockist using Software
Update.
Using Factory settings, all settings made to the device can be reset to the basic settings, meaning the
delivery condition. All personal settings and the telephone list are deleted and the mobile telephone must
be re-coupled with the Touch Adapter.