Menu Settings; Bluetooth; Audio - Volkswagen 3C0 051 435 TA Operating Instructions Manual

7

Menu settings

The menu „Settings" can be reached using the
marked with are active or have been switched on.
CAUTION!
●
All settings made to the Touch Adapter should be carried out when the vehicle is stationary.

7.1 Bluetooth

Telephone list:
In the telephone list, those mobile telephones saved are listed (the devices) that have already been
coupled with the Touch Adapter via a Bluetooth
When you select a mobile telephone from the list, in the next step you can separate the Bluetooth
connection, delete it from the list or select as standard. If the features of a mobile telephone are assigned
as standard, after turning on the mobile telephone integration product, this mobile telephone is always
searched for first.
Delete list:
Deletes the list of mobile telephones already coupled. After deleting the list, the mobile telephones must
be coupled with the Touch Adapter via a Bluetooth
Pin Code:
Enables the use of your own password (Pin Code) for the Bluetooth
password is displayed in brackets, e. g. standard (0000).
Beware!
●
The password used must be identical with the password saved in the control unit of the mobile
telephone integration product, otherwise the Touch Adapter cannot establish contact. You can have
the password saved in the control unit of the mobile telephone integration product changed by your
Volkswagen Partner.
Automatic connection:
With Automatic connection activated, a search is automatically made for the mobile telephones saved
after turning on the ignition or the Touch Adapter. First, always the last mobile telephone connected is
searched for and then any other mobile telephones saved. The Bluetooth
automatically to the first mobile telephone detected. Automatic connection is activated as default.
Coupling UHV:
With coupling UHV, the Touch Adapter is coupled with the control unit of the mobile telephone
integration product via a Bluetooth
the vehicle off before beginning with the coupling process. After starting, the coupling runs automatically
and is accompanied by different signal tones. After completing the coupling, the main menu is displayed.

7.2 Audio

Dial tones:
You can select from different dial tones. With incoming calls, the dial tone selected is played back via the
vehicle loudspeaker. Provided that the mobile telephone supports the function, the dial tone of the
mobile telephone can be transferred to the Touch adapter using the selection Mobile.
Volume:
Menu for setting the basic volume of the mobile telephone integration product for the dial tone. The
volume can be adjusted using the controller on the radio during the playback.
If the dial tone of the mobile telephone is transferred to the Touch Adapter, the playback volume cannot
be set on the Touch Adapter.
19
More pushbutton. With the
®
connection.
®
connection once again.
®
connection. Turn the Bluetooth
symbol or the function
®
connection. The current valid
®
connection is established
®
function on all mobile devices in
®