Table of Contents
Advertisement
DVD SECTION
CHANGING THE DVD SET UP ITEMS
B
DISPLAY SETTING
4
Use [
/
] to select an item,
K K
L L
then press [ENTER].
• TV MODE:
QUICK
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
• 4:3 LETTER BOX (default):
To show black bars on top and
bottom of the screen.
• 4:3 PAN & SCAN:
To show a full height picture with both sides
trimmed.
NOTE:
• You can access this setting directly by selecting
"QUICK" at step 2 on page 21.
• STILL MODE:
This function allows you to adjust picture resolution
and quality in the still mode.
• AUTO (default):
Automatically select the best
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
• FIELD:
Select "FIELD" when the pictures are still unstable
even if "AUTO" is selected. FIELD stabilizes the
pictures, although the picture quality may become
coarse due to the limited amount of data.
• FRAME:
Select "FRAME" to display relatively motionless
pictures in higher resolution. FRAME improves
the picture quality, although it may unstabilize the
pictures due to simultaneous output of two field
data.
5
Press [SET-UP] to exit the menu.
22
EN
C
Choose the appropriate Audio settings for your
SETUP
DISPLAY
equipment as it only affects during the playback of
TV MODE
4:3 LETTER BOX
STILL MODE
AUTO
DVD discs.
4
SETUP
DISPLAY
TV MODE
4:3 LETTER BOX
4:3 PAN & SCAN
• DRC (Dynamic Range Control):
• ON : To compress the range of soft to loud sound.
• OFF : Output the original sound.
• DOWN SAMPLING:
• ON : Output in 48kHz. (default)
• OFF : Output the original sound.
SETUP
DISPLAY
STILL MODE
AUTO
FIELD
FRAME
• DOLBY DIGITAL:
• BITSTREAM: Output a Dolby Digital signal.
• PCM:
5
D
This feature allows you to set the rating level of your
DVD discs. Playback will stop if the disc ratings
exceed the level you set.
PARENTAL LEVEL
4
Enter four-digit password with
the Number buttons, then
press [ENTER].
5
Use [K K / L L ] to select
"PARENTAL LEVEL", then
press [ENTER].
AUDIO SETTING
Use [
/
] to select an item,
K K
L L
then press [ENTER] repeated-
ly until your desired setting
appears.
(default)
NOTE:
• When playing a disc with copyright protection, the
sound will be output at 48kHz even if the setting is
"OFF".
QUICK
(default)
Convert the Dolby Digital to PCM.
(2 channel stereo)
NOTES:
• You can access this setting directly by selecting
"QUICK" at step 2 on page 21.
• Set to "BITSTREAM" when the unit is connected to
a Dolby Digital Decoder.
Press [SET-UP] to exit the menu.
PARENTAL SETTING
NOTE:
• Enter any 4 digits (except for 4737) to set the pass-
word for the first time, and record it for your memory.
SETUP
AUDIO
DRC
ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
SETUP
PARENTAL
PASSWORD
Please enter a 4-digit password.
SETUP
PARENTAL
PARENTAL LEVEL
ALL
PASSWORD CHANGE
Advertisement
Chapters
Table of Contents
