Troubleshooting - Salton WC-2034 Instruction Booklet

TROUBLESHOOTING

PROBLEM
Appliance does not operate.
Appliance is not cold enough.
Turns on and off frequently.
Vibrations.
Condensation on front of door.
Moisture on exterior of appliance.
Ice formation on the inner rear wall. • The door gasket does not seal properly.
The door will not close properly.
POSSIBLE CAUSE
• Not plugged in.
• The circuit breaker tripped or there is a blown fuse.
• Check the temperature control setting.
• The door is opened too often.
• The door is not closed completely.
• The door gasket does not seal properly.
• The room temperature is hotter than normal.
• The door is opened too often.
• The door is not closed completely.
• The temperature control is not set correctly.
• Check to assure that the appliance is level.
(See "Installation" section).
• Room environment is too humid.
• Normal during periods of high humidity – wipe
• The door is opened too often or for too long.
• The appliance is not level.
(See "Installation" section).
• The door was reversed and not properly installed.
• The gasket is dirty.
8