Troubleshooting - Salton WC-2012 Instruction Booklet

TROUBLESHOOTING

You can solve many common appliance problems easily, saving you the cost
of a possible service call. Try the suggestions below to see if you can solve
the problem on your own.
PROBLEM
Appliance does not operate.
Appliance is not cold enough. Check the temperature control setting.
Turns on and off frequently.
The light does not work.
Vibrations.
The appliance seems to make The rattling noise may come from the flow
too much noise.
The door will not close
properly.
POSSIBLE CAUSE
Not plugged in.
The circuit breaker tripped or a blown fuse.
External environment may require
a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb has burned out.
The switch is in the "OFF" position.
Check to assure that the appliance is level.
of the refrigerant, which is normal. As each cycle
ends, you may hear gurgling sounds caused by
the flow of refrigerant in your appliance.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The appliance is not level.
The appliance is not level.
The door was reversed and not
properly installed.
The gasket is dirty.
The shelves are out of position.
10