Salton PLATINUM Series Instruction Booklet
Hide thumbs
Also See for PLATINUM Series:
- Instruction booklet (14 pages) ,
- Instruction booklet (13 pages) ,
- Instruction booklet (13 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Salton PLATINUM Series
Summary of Contents for Salton PLATINUM Series
- Page 1 “Supra-press” Steam Iron Instruction Booklet Model: IR-1033 P...
-
Page 2: Important Safeguards
9. Do not operate the iron with a damaged cord or plug or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Contract Salton for examination, repair or adjustment. See Warranty section. -
Page 3: Polarized Plug
be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type, the extension cord should be a grounded 3-wire cord. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). - Page 4 1. Profiled Soleplate – Scratch resistant stainless steel soleplate with ‘Leading Edge’ steam outlets that channel steam to the soleplate tip. 2. Water Reservoir – Extra large, easy-fill water reservoir for continual high steam performance without having to refill the tank regularly. 3.
-
Page 5: Before First Use
function removes scale and impurities. The Steam Valve can be removed to clean the scale build-up. See Care & Cleaning section. 14. Water Reservoir Cover 15. Mist Nozzle 16. Button Groove – Full length button groove around the entire soleplate. 17. -
Page 6: Dry Ironing
NOTE: If you cannot determine what type of fabric an item is made of, test the item by ironing a small section on an inside seam. 2. Insert the plug into the wall outlet. The Power ‘On’ Light LINEN DENIM at the top of the handle will illuminate. -
Page 7: Steam Ironing
Filling the Iron with Water • Before filling the Iron with water, ensure that the Temperature Control has been reduced to the lowest setting and the plug has been removed from the wall outlet. The Iron can be filled with water while it is hot. •... -
Page 8: Burst Of Steam
4. To use the spray mist to remove stubborn creases, press the ‘Spray Mist Button’ to release a fine mist from the Spray Nozzle (Ill. 7). Leading Edge Steam Ill. 7 The Leading Edge Steam feature will channel steam towards the front of the Soleplate. -
Page 9: Helpful Hints
3. Hang the garment in a location that will not be damaged from heat or moisture. Hold the fabric taut. 4. Press the Burst of Steam Button. Keep the iron a few inches away from the garment and move it up and Ill. -
Page 10: Self-Cleaning
4. Open the Water Reservoir Cover and turn the Iron upside down to empty the Water Reservoir (Ill. 9). NOTE: The water in the iron may be hot. Be careful when emptying water. Stand the Iron in an upright position and allow to cool. Ill. -
Page 11: Cleaning The Removable Steam Valve
12. If steam development is insufficient, repeat the Self-Cleaning process. Cleaning the Removable Steam Valve 1. In addition to the self-cleaning operation the Steam Valve should be cleaned once or twice a month. 2. Before removing and cleaning the Steam Valve, Ill. - Page 12 Cleaning the Steam Holes 1. The Iron must be cool and unplugged from the wall outlet. 2. Use a damp cloth to wipe away any build-up of lint or starch in the steam holes. If necessary, remove excess build-up by using a cotton swab moistened in denatured alcohol.
-
Page 13: Limited Warranty
® SALTON CANADA Customer Service Department 81A Brunswick Dollard-des-Ormeaux Quebec, Canada H9B 2J5 Website: www.salton.com E-mail: service@salton.com Fax: 514-685-8300 Tel: 514-685-3660 * Return/exchange policies at each retailer vary and may differ from the Salton Canada 1 year limited warranty period.