Salton Platinum Series Instruction Booklet

Compact fabric steamer and iron
Hide thumbs Also See for Platinum Series:

Advertisement

Compact Fabric
Steamer and Iron
Instruction Booklet
Model: ST-1014

Advertisement

Table of Contents
loading

Summary of Contents for Salton Platinum Series

  • Page 1 Compact Fabric Steamer and Iron Instruction Booklet Model: ST-1014...
  • Page 2: Important Safeguards

    9. Do not operate any appliance with a damaged cord or plug or if the iron has been dropped or damaged. To avoid risk of electrical shock, do not disassemble unit. Return appliance to Salton for examination, repair or adjustment. See Warranty section.
  • Page 3: Grounded Plug

    Fabric Brush while unit is in use. Use caution when you turn unit upside-down as there may be hot water in the Water Reservoir. 16. The use of accessories or attachments not recommended by Salton may cause hazards.
  • Page 4: Description Of Parts

    DESCRIPTION OF PARTS 1. Handle - Designed to stay relatively cool and is safe to grasp. 2. Steam Button - Press and hold to produce a steady flow of steam 3. Heater Indicator Light - Illuminates when the unit is turned on, indicating that the heater is active.
  • Page 5 13. Clothes Hanger Hook - Extends out from the Wall Mounted Base and is used to hand clothes hangers for easy garment steaming. 14. Lighted On/Off Switch - Turns the unit 'On' and 'Off' and provides a clear indicator of whether or not the unit is powered on. 15.
  • Page 6 Ill. 2A Nozzle onto the Steam Nozzle Hanger until Ill. 2B it is secured in place. See Illustration 2A. 5. Align the 3 holes in the back of the Water Reservoir with the 3 hooks protruding from the front of the Wall Mounting Base. Press the Water Reservoir onto the Wall Mounting Base.
  • Page 7 4. Replace the Water Reservoir Cap and close the top lid. 5. The Water Reservoir may be refilled as soon as it is emptied. Place the Steam Nozzle back onto the Steam Nozzle Hanger. Follow the instructions in #1 to #4 above. CAUTION: Do not let the steamer operate with a dry Water Reservoir or damage to the unit could result.
  • Page 8: Helpful Hints

    2. Use a slight back and forth motion while directing the Steam Nozzle towards the material you wish to steam. 3. Move the Steam Nozzle away from the garment and smooth the fabric with your free hand. 4. Repeat as necessary until the garment is wrinkle-free. 5.
  • Page 9: Cleaning And Storage

    CLEANING AND STORAGE Cleaning the Ironing Plate 1. Switch the On/Off Switch to the ‘Off’ position and unplug from the wall outlet. Allow the Ironing Plate to cool down completely, at least 30 minutes. 2. Clean the outside of the unit using a damp cloth, with mild soap. 3.
  • Page 10: Troubleshooting

    5. Keep the Steam Button pressed and allow unit to continue cleaning for at least 2 minutes. NOTE: More time may be necessary if the unit has not been cleaned regularly. An additional minute or two is recommended if it has been more than 3 –...
  • Page 11 Troubleshooting Problem Cause Solution The unit fails to heat up. • Unit is not plugged in. • Plug into an electrical Heater Indicator Light outlet. does not illuminate. • Household circuit • Reset circuit breaker/ground fault breaker/ground fault interrupter has tripped interrupter or replace or blown a fuse.
  • Page 12: Limited Warranty

    For repairs not covered by the warranty, please contact us for assistance. SALTON CANADA Customer Service Department 81A Brunswick, Dollard-des-Ormeaux, Quebec, Canada H9B 2J5 website: www.salton.com E-mail: service@salton.com Fax: 514-685-8300 Tel: 514-685-3660 * Return/exchange policies at each retailer vary and may differ from the SALTON Canada 1 year limited warranty period.

This manual is also suitable for:

St-1014

Table of Contents