Salton FC1952 Instruction Booklet page 5

2-in-1 single serve coffee maker
Table of Contents

Advertisement

3. Press the Brew Chamber Release Button on the front of the Coffee
Maker to release the Top Lid and K-Cup® Capsule Puncturing
Mechanism.
4. Insert a K-Cup® capsule into the Capsule Holder.
NOTE: Do not remove or puncture the foil top of the K-Cup®
capsule before inserting into the Coffee Maker.
5. Close the Top Lid making sure it is completely closed. The K-Cup®
capsule will be punctured on the top and bottom allowing for the water
to flow through the capsule during the brewing cycle.
NOTE: The Capsule Puncturing Mechanism will not lower and
latch if the Top Lid is not properly closed.
6. Place a cup on the Drip Tray directly under the Brew Spout.
7. Push the Capsule Brew Button and the brew cycle will begin. The
Capsule Brew Button will flash while water heats. Once the Coffee
Maker is ready to brew, the Capsule Brew Button will remain
illuminated and stop flashing.
NOTE: To stop the brewing cycle at any time, press the Capsule
Brew Button. Be sure to keep the cup in place until the end of
the brew cycle so to catch any excess drips.
8. When the brew cycle is complete, the Coffee Maker will shut off.
9. Wait for the Coffee Maker to cool before removing used capsules as
they remain hot following the brew cycle. Press the Brew Chamber
Release Button and carefully remove the used capsule and discard.
Lower the Top Lid.
Brewing Coffee Using Ground Coffee
1. Place the Coffee Maker on a dry, level and heat-resistant surface.
2. Fill the Water Tank to the desired level from 6 oz to 14 oz according to
the markings located on the Water Tank Filter.
DO NOT place any liquid other than water in the Water Tank.
3. Press the Brew Chamber Release Button on the front of the Coffee
Maker to release the Top Lid.
4. Place coffee grounds into the Brew Basket. Never fill above the MAX
marking of the Brew Basket.
5. Close the Top Lid of the Coffee Maker making sure it is completely
closed.
6. Place a cup on the Drip Tray directly under the Brew Spout.
7. Push the Ground Coffee Brew Button and the cycle will begin. The
Ground Coffee Brew Button will flash while water heats. Once the
Coffee Maker is ready to brew, the Ground Coffee Brew Button will
remain illuminated and stop flashing.
5

Advertisement

Table of Contents
loading

Table of Contents