DeWalt DW006 Instruction Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Drill
  5. DW006
  6. Instruction manual
DeWalt DW006 Instruction Manual

DeWalt DW006 Instruction Manual

Cordless percussion drill/driver
Hide thumbs Also See for DW006:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , Manual
®
DW006

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DW006

Summary of Contents for DeWalt DW006

  • Page 1 ® DW006...

  • Page 4: Technical Data

    E N G L I S H CORDLESS PERCUSSION DRILL/DRIVER DW006 Congratulations! Fuses: You have chosen a D WALT Power Tool. Years of Europe 230 V tools 10 Amperes, mains experience, thorough product development and U.K. & Ireland 230 V tools...
  • Page 5 E N G L I S H Director Engineering and Product Development 7 Wear safety goggles Horst Großmann Also use a face or dust mask in case the operations produce dust or flying particles. 8 Beware of maximum sound pressure Take appropriate measures for the protection of hearing if the sound pressure of 85 dB(A) is exceeded.

  • Page 6: Package Contents

    E N G L I S H 16 Remove the battery pack Remove the battery pack when not in use, before servicing and when changing accessories. See technical data for charging time 17 Have your tool repaired by an authorized WALT repair agent This Power Tool is in accordance with the Refresh mode...

  • Page 7: Using An Extension Cable

    E N G L I S H Your D WALT charger is double Always switch off the tool before insulated in accordance with EN 50144. inserting or removing the battery pack. Before using the tool, make sure the Mains plug replacement battery pack is properly seated.
  • Page 8 E N G L I S H Refresh mode (fig. A) • Select the required operating mode by rotating the mode selector (4) towards the appropriate The refresh mode helps to maintain symbol. the optimum capacity of the battery pack. It is therefore recommended to Forward/reverse slider (fig.

  • Page 9: Maintenance

    E N G L I S H • Rotate the side handle to the desired position Drilling in wood and tighten the handle. • Holes in wood can be made with the same twist drills used for metal. These bits may overheat Instructions for use unless pulled out frequently to clear chips from the flutes.
  • Page 10 E N G L I S H Environment GUARANTEE • 30 DAY NO RISK SATISFACTION GUARANTEE • If you are not completely satisfied with the performance of your D WALT tool, simply return Rechargeable battery pack it within 30 days, complete as purchased, to the This long life battery pack must be recharged when point of purchase, for a full refund or exchange.

Table of Contents