Usage Precautions; Specifications; Power Supply Precautions - Sony PWS-110NM1 Operation Manual

Usage Precautions

Power supply precautions

If the unit is suddenly turned off during operation, data loss
may occur. To maintain data integrity, the use of an
uninterruptible power supply (UPS) is recommended.
To disconnect the power cord or turn off the breaker,
always press the On/Standby button on the unit to stop the
unit before proceeding.
Components with limited lifespan
The fan and battery are consumable parts that will need
periodic replacement.
When operating at room temperature, a normal
replacement cycle will be about 2 to 5 years.
However, this replacement cycle represents only a general
guideline and does not imply that the life expectancy of
these parts is guaranteed. For details on parts replacement,
contact your dealer.
USB device precautions
When using the unit when connected to a self-powered
USB device, the device may not be recognized, depending
on the timing of when the device is turned on. If this
occurs, turn the USB device off and on again, or
disconnect and reconnect the USB cable.
The unit does not support UASP (USB Attached SCSI
Protocol).
Precautions for network-enabled devices
Depending on the operating environment, unauthorized
third parties on the network may be able to access the
system.
We strongly recommend configuring all of the passwords
for security purposes.
Configure all the passwords following the procedure on
page 18.
From a safety standpoint, when using the unit connected
with the network, it is strongly recommended to access the
Control window via a Web browser and change the access
limitation settings from the factory preset values
(page 18).
Changing the password regularly is also recommended.
Do not browse any other website in the Web browser while
making settings or after making settings. Since the login
status remains in the Web browser, close the Web browser
when you complete the settings to prevent unauthorized
third parties from using the unit or harmful programs from
running.

Specifications

General
Power requirement
100 V to 240 V AC
50/60 Hz
Power consumption
235 W
Standby power consumption
3 W or lower
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Storage temperature
–20 °C to +60 °C (−4 °F to +140 °F)
Operating humidity
20% to 90% (relative humidity)
Storage humidity
5% to 80%
Mass 10.4 kg (22 lb. 15 oz.)
440 × 43.6 × 507 mm (17
Dimensions
20 in.) (width / height / depth)
3
440 (17 / )
8
482 (19)
CPU
Processor Intel Core i7 6700TE (2.4 GHz)
Memory 8 GBytes
SO-DIMM (DDR4) (2)
Drive (M.2) 120 GBytes
Expansion bus PCIe Gen2 8Lane (30 W) (2)
Inputs/outputs
LAN RJ-45 (2)
1000BASE-T
100BASE-TX
3 × 1 3 ×
/ /
8 4
Unit: mm (in.)
507 (20)
3
43.6 (1 / )
4
Usage Precautions / Specifications
21