Table of Contents
Advertisement
TD530XA/601XB
01-36
02.8.26
11:44
AM
Page
33
5 Set Ibeg rmi,'_g Ibou,
Press the Arrow • or • button until
the desired
hour appears.
(Example:
" 7, PM" for 7:30PM)
Then, press the Arrow I1_ button.
Set II'se_ _wd,'_g ,}_ t '_u_@
Press the Arrow • or • button until
the desired
minute appears.
(Example:
"30" for 7:30PM)
Then, press the Arrow I1_ button.
Set ÷r_@Ihou,'
Press the Arrow • or • button until
the desired
hour appears.
(Example:
"8, PM" for 8:50PM)
Then, press the Arrow I_ button.
8 Set end m t',uU:e
Press the Arrow • or • button
until the desired
minute
appears.
(Example:
"50" for 8:80PM)
Then, press the Arrow I_ button.
9 Set the ts_e speed
Press the Arrow • or • button
until the desired
tape speed
appears.
(Example:
SP)
1() Fnsh
settirtg
the progh_m
Press the Arrow I_ or <1 button. The program
is now
completed.
• To set another
program,
repeat
steps [21 to [10].
• Press the SETUP button
on the remote
control to
return to original
mode.
_
Set he tiim÷r
Press the POWEP,
button to set automatic
timer
recording.
The TIMER
REC indicator
lights up.
• You must turn off the TV/DVD/VHS
to activate
automatic
timer recording.
If power is not turned off and you continue
watch-
ing TV, "TIMER
REC STANDBY"
starts flashing
on the TV screen
2 minutes
before
the programmed
start time.
To shift the time schedule
of an automatic
timer
recording.
l)Press
the POWER
button.
2)Repeat
step [1] on page 32.
3)Press
the RECORD
button
and select the desired
program
using the Arrow • or • button.
4)Press
the RECORD
button again.
Each additional
push will shift forward
the
begin/end
time for recording
by 10 minutes.
When
the recording
is already
in progress,
each additional
push will shift forward
the end time only. If you
want to cancel
while setting, press the PAUSE but-
ton on the remote control.
The recording
time
returns to the original
time.
NOTE:
When you shift forward
the time schedule
during recording,
the recording
speed will automati-
cally be set to the SLP mode.
5)Press
the Arrow _
or <1 button to exit the setting
menu. Then press the SETUP button on the remote
control
to return to original
mode.
70 CO]?RE_
'F A H_,_O( f{'AM
• While setting
a program;
press the Arrow <1 but-
ton to go back one step and enter the correct
num-
bers using the Arrow •
or • button.
• After setting a program;
l)Press
the POWER
button.
2)Repeat
steps [1] - [2] on page 32.
3)Press
the Arrow I_ button (or press the Arrow <1
button to go back one step) until the part you
want to correct begins flashing,
then make the
changes
pressing
the Arrow • or • button.
4)Press
the POWER
button to set automatic
timer
recording.
ZV?CAN(;Ts'L AN A UZ'OMAZ7_: ZT,WER
R_'ECOIH _Y?d(
• After setting
a program;
l)Press
the POWER
button.
2)Repeat
steps [1] _ [2] on page 32 and select a
program
you want to cancel.
3)Press
the C.RESET
button.
4)Press
the SETUP
button on the remote control
to
return to TV mode.
• While recording
is in progress;
l)Press
POWER
button.
2)Press
the STOP/EJECT
button on the
TV/DVD/VHS.
-33-
EN
IC29
Advertisement
Table of Contents
