Table of Contents
Advertisement
TD530XA/601XB
01-36
02.8.26
11:44
AM
Page
26
Make sure ...
• TV/DVD/VHS
power must be turned
on.
Ihr_se,la p,erecorded
_ape
If the erase-protection
tab has been removed,
the
TV/DVD/VHS
will start playback
automatically.
2 _lb be_in? pli_yback
Press the PLAY button.
3 _lb _dop pll_¢yba©k
Press the STOP button
when play-
back is completed.
NOTES:
• If you press the TV/VCR side PLAY button in the
DVD mode, you can start the VCR playback.
• If you press the SELECT
button in the VCR
playback,
it will stop and the mode will
change to the DVD mode. In addition,
the
same function
operates
with the DVD side
PLAY button or OPEN/CLOSE
button.
During pause, press the FWD button to reduce the
playback
speed. The TV/DVD/VHS
mutes the sound
during slow motion. Press the PLAY button to return
to normal playback.
NOTE:
If it is left in the Slow mode for more than
five minutes,
the TV/DVD/VHS
will automatically
go into the Stop mode.
This feature is very useful in finding
or skipping
over
a particular
scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward
or reverse direction
by pressing
the F.FWD or REW button.
(in the SP / LP / SLP
modes)
NOTE:
• If you press the EFWD
or REW button on the
front panel in the DVD mode, the VCR forward
or reverse will start. Please press the STOP /
EJECT button once to stop it, twice to eject it.
2)Press
it again and the TV/DVD/VHS
will now
search in super high speed. (in the LP / SLP modes
only)
NOTE:
• Tapes recorded
in the SP or LP mode will dis-
play a noise bar on the TV screen and the picture
may revert to Black and White.
This is normal.
3)Press
the PLAY button to return to normal
speed.
• Tracking
adjustment
will be set automatically
(Digital Tracking
function)
when you start play-
back.
• However
when playing
pre-recorded
tapes or tapes
recorded
on units other than your own, noise lines
(black and white streaks)
may appear
on the play-
back picture.
If this occurs, you can adjust the
tracking
control
manually
by pressing
the CHAN-
NEL • or • button until the streaks disappean
To
return to the DTR function,
stop the tape once and
start playback
again.
• You can reduce the noise lines by pressing
the
CHANNEL
• or • button
in slow mode, too.
Tracking
adjustment
in Slow mode will not be set
automatically_
NOTE:
• In Still mode, press the SLOW button and press the
CHANNEL
• or • button
until streaks disappear.
To return to Still mode, press the PAUSE button
again.
- 26 -
You can view a still picture on the TV screen dining
playback
(the Still mode).
Press the PAUSE button
during playback.
Only tapes recorded
in the SLP
mode will show the least amount
of lines.Press
the
PLAY button to return to playback.
NOTES:
• You can advance
the picture one frame at a time by
pressing
the PAUSE button
during the Still mode.
• If it is left in the Pause mode for more than five
minutes,
the TV/DVD/VHS
will automatically
switch to the Stop mode.
In the Pause!Still
mode only, when the picture
begins
to vibrate vertically;
stabilize
the picture by pressing
the CHANNEL
• or • button.
NOTE:
If there are video noise lines on the screen, see Tracking
Adjustment
section.
EN
IC29
Advertisement
Table of Contents
