Touch Pad Assembly Removal - Toshiba Satellite A10 Series Field Replaceable Unit Documentation

FIELD REPLACEABLE UNIT DOCUMENTATION
TOP COVER REMOVAL
Plastic insulator PJ6000/PJ6001
1. Disconnect the LCD/FL cable from PJ5600 on the
system board.
2. Lift up the plastic insulator covering the Left/Right
speaker cables and disconnect the Left/Rightspeaker
cables from PJ6000/PJ6001.
3. Remove one M2.5x8 black flat head screw securing
top cover and lift out the top cover assembly.
BAT CON HOLDER REMOVAL
M2.5x8 black flat head screws
1. Remove two M2.5x8 black flat head screw securing
the bat con holder.
2. Lift out the bat con holder from the system board.
Satellite
A10 Series
LCD/FL cable
PJ5600
M2.5x8 black
flat head
screw
Left/Right speaker cables
Bat con holder
TOSHIBA
Tough Enough for Today's World
TM

TOUCH PAD ASSEMBLY REMOVAL

Touchpad
cable
M2.5x5 black flat head screw
1. Disconnect the touch pad cable from PJ3201 on the
system board.
2. Remove one M2.5x5 black flat head screw securing
the touch pad assembly.
3. Lift out the touch pad assembly.
SYSTEM BOARD REMOVAL
System
board
M2.5x5 black flat head screws
1. Peel off the glass tape securing the RTC battery
cable.
2. Remove two M2.5x5 black flat head screw
securing the system board.
3. Lift up the system board from the right hand side
and lift it out.
PJ2004
Touch pad assembly
Glass
tape