Display Modes - Logik L22DAB10E Instruction Manual

Display Modes

Every time you press the INFO button, the display will cycle through the following display
modes: Programme Type, Signal Strength, Time/Date, Channel Frequency, Audio
Mode, Radio Text.
GB
Programme Type
This describes the "Style" or "genre" of music
that is being broadcast e.g. "Rock" or "Classical".
Signal Strength
The slide bar indicates how strong the signal is,
the stronger the signal, the longer the bar will
be.
Time/Date
The broadcaster (Radio station) provides clock
and date information automatically so there's
no need to manually set this information. In the
unlikely event that the broadcaster does not
transmit any clock information; the display will
show <Time/Date>.
Channel Frequency
This shows the frequency of the current station
e.g. 89.80MHz.
Audio Mode
When in FM mode, the display will show if the
station being received is in mono or stereo.
The receiver will automatically switch between
Stereo and Mono mode. You can however
override this function, so that you can manually
switch between Stereo and Mono mode, which
is helpful if you're listening to a poor FM signal.
To switch between mono and stereo, press the SELECT button once, you will see on
the display "Auto" or "Mono". To toggle between each mode just press the SELECT
button again.
Radio Text
As with DAB, the broadcaster can include a
scrolling text that displays information about
the current program. If Radio text information
is not available, then the display with show
<Radio Text>.
14
Programme Type
Signal Strength
Time/Date
Channel Frequency
Audio Mode
Radio Text