Dell PowerEdge System Management Manual page 23

Systems Management
Feature
Inventory (continued)
Physical disk firmware
version
Backplane firmware
version
Memory information
including installed capacity,
maximum capacity, slots
available, slots used, ECC
type, DIMM type, DIMM
Bank Name, DIMM
AssetTag Name, DIMM
Failure Mode, DIMM Form
Factor, DIMM Device
Name, DIMM Device
Type, Device Manufacturer
Name, Device Part Number
Name, and Device Serial
Number Name
Network information
including IP Address, MAC
address, vendor,
description, and TOE
capability
Port information such as
port type, external name,
base I/O address, IRQ level,
Connector Type, and
maximum speed
Slots information
including slot ID, adapter
installed in the slot, and
data bus width
ESX
Available through
OpenManage Server
Administrator, IT
Assistant, and DRAC.
Available through
OpenManage Server
Administrator, IT
Assistant, and DRAC.
Available through
OpenManage Server
Administrator and IT
Assistant.
Available through
OpenManage Server
Administrator and VI
Client.
Available through
OpenManage Server
Administrator.
Available through
OpenManage Server
Administrator.
Systems Management Guide
ESXi
Available through VI
Client.
Not available through VI
Client; available only
during boot process.
Not available.
Available through VI
Client. MAC address
cannot be seen through VI
Client. TOE information is
N/A.
Not available.
Not available.
23