Table of Contents
Advertisement
● Accumulated elapsed time measurement
１． Make sure that the mainspring is sufficiently wound and the watch is
working.
２．Start measuring time.
Upon pressing of the STA RT/
STOP button, the chronog raph
70
hands start moving and the chrono-
graph starts measuring time.
※ The orientation and design of the display may
vary depending on the model.
※ For models with a rotatable watchcase, rotate it
to the position for chronograph use.
Refer to "ROTATABLE WATCHCASE" on page 52.
５．Stop measuring time.
At the moment you want to finish the mea-
surement, press the START/STOP button
again to stop the chronograph hands. The
measured time displayed at this time will
be the total of the first and the second
measurement （accumulated elapsed time） .
72
■ REMARKS ON AFTER-SALES SERVICING
・ Your IZUL watch was strictly checked and completely adjusted at the
factory to ensure its high accuracy. However, if your watch gets out of
order with the correct way of use as described in this instruction booklet
within the guarantee period, take your watch to the dealer from whom
your watch was purchased together with the certificate of guarantee. The
watch will be repaired and adjusted free of charge by the manufacturer.
・ The guarantee period is one year from the date of purchase. For the
movement only, this guarantee period is extended to two years from the
74
date of purchase. More detailed guarantee coverage is provided in the
certificate of guarantee.
・ For repair services after the guarantee period has expired or for any
other information regarding the IZUL watch, please contact the retailer
from whom your watch was purchased or the "CUSTOMER SERVICE
DEPARTMENT" of SEIKO WATCH CORPORATION.
■ TO PRESERVE THE QUALITY OF YOUR WATCH
CAUTION
CARE OF YOUR WATCH
・ The case and bracelet touch the skin directly just as underwear.
・ If they are left dirty, the edge of sleeve may be stained with rust of those who have a
delicate skin may have a rash.
・ After removing the watch from your wrist, wipe perspiration or moisture with a soft
cloth. This will prevent the watch from being soiled, adding to the life of the gasket.
・ Do not clean the watch with chemicals （especially with organic solvents such as
76
benzene, thinner, alcohol, detergent, etc.） . Otherwise, the watch may be deteriorated.
LEATHER BAND
・ When removing moisture from a leather band, do not rub the band with the cloth as
they may discolor it or reduce its gloss. Be sure to blot up the moisture using a soft
dry cloth.
・ Please note that leather bands may become less durable when they are moistened.
METAL BRACELET
・Clean the watch bracelet with a soft toothbrush dipped in water or soapy water.
６． Repeat measuring time cumulatively.
Step 4 and 5 above can be repeated as required.
As you repeat pressing of the START/STOP but-
ton, the measurement will stop and restart and each
elapsed time measurement will be accumulated.
７．Reset the chronograph hands.
After stopping the chronograph
hands, press the RESET button to
return all the chronograph hands
to the 0 position.
３．Stop measuring time.
At the moment you want to fin-
ish the measurement, press the
START/STOP button again to
stop the chronograph hands. The
measured time will be displayed.
■ HOW TO USE THE THREE-PIECE FOLDOVER CLASP FOR A LEATHER BAND
End of the band
Clasp
Hole
Pin
１． Unfasten the clasp, and
２． Insert the end of the
slide the end of the band
b a n d i n t o b o t h t h e
（at the 12 o'clock side）
movable loop and the
into it. Fix the length of
fixed loop.
the band by placing the pin
into an appropriate hole.
※ When wearing the watch, make sure that you insert the end of the band into both the
movable loop and the fixed loop, and then securely fasten the clasp.
■ REMARKS ON REPLACEMENT PARTS
・ SEIKO makes it policy to usually keep a stock of spare parts for IZUL
watches for 10 years. In principle, your watch can be reconditioned within
this period if used normally. （Replacement parts are those which are es-
sential to maintaining the functional integrity of the watch.）
・ The number of years that a watch is considered repairable may vary
greatly depending on the conditions under which it was used, and normal
accuracy may not be achieved in some cases. We recommend, therefore,
that you consult the retailer from whom the watch was purchased when
having them repair your watch.
・ The case, dial, hands, glass and bracelet, or parts may be replaced with
substitutes if the originals are not available.
・ For any other information, contact the retailer from whom your watch was
purchased or the "CUSTOMER SERVICE DEPARTMENT" of SEIKO
WATCH CORPORATION.
CAUTION
RASH AND ALLERGY
・ Adjust the bracelet and band so that there will be a little clearance between the
bracelet or band and your wrist to avoid accumulation of perspiration.
・ If you are constitutionally predisposed to rash, the band may cause you to develop a
rash or an itch depending on your physical condition.
・ The possible causes of the rash are as follows:
1. Allergy to metals or leathers
2. Rust, dust or perspiration on the watch or band
・ If you develop any skin reactions, take off the watch and consult a doctor immediately.
４．Restart measuring time.
Upon pressing of the START/
STOP button again, the chro-
nograph hands restart moving
from the position they had pre-
viously stopped.
Fixed loop
Movable loop
３． Push the clasp down
until it clicks to securely
fasten the band.
71
73
75
77
Advertisement
Chapters
Table of Contents
