Account Settings - Canon IP100 User Manual

"Login Password"
Enter your password. You only have to configure once.
"Use Public IP to register"
Choose "Yes" or "No". WebCAM will automatically send the WAN IP to the DDNS
server. This ensures that DDNS is notified of your current Dynamic IP.
vi. PPPoE
Use this option to allow WebCAM to directly dial-up using your xDSL modem and
connect to the Internet. Once set-up, WebCAM will be able to stream the video
images directly to the Internet without going through a router.
"When Connection should be made"
The user has a choice of;
Disabled
Connect always
"Login Name"
Enter the login name assigned by your ISP.
"Login Password"
Enter the password assigned by your ISP.

2.3.3 Account Settings

This section allows you to set up to Eight (8) user account with different permissions
for WebCAM.
i. User Account
"User Name"
Determine the username of visitors who can log in. The administrator can set up
to 32 case sensitive character names.
"Password"
Set a password for the visitor's account. The administrator can set up to 32
case sensitive passwords.
"Permission"
Determine the permission level to one of "Administrator", "Operator", "Viewer" or
"No Access"
Administrator:
WebCAM user manual
Fig.24. WebCAM PPPoE setting
: Default setting. WebCAM does not dial in
: WebCAM will automatically dial in.
An Administrator has full access including write
permission to all sections. Only an Administrator
Chapter 5: Web Manager
-30-