Section 2. Webcam Web Manager Interface - Canon IP100 User Manual

Section 2. WebCAM Web Manager Interface

The WebCAM webpage main menu is divided into two sections. The selection menu
on the left and display menu on the right. The selection menu consists of the
following options:
2.1 Web-Camera Selection
2.2 Information
2.3 Basic Settings
2.4 Advanced Settings
2.5 Viewing images using a PDA / Web Enabled Phone
When using WebCAM for the first time, you must set the following to ensure that
WebCAM works smoothly;
a. Set the necessary parameters in the "Configuration" menu. In
particular, the "Anti Flicker" under "Camera Settings" should be set to
50Hz or 60Hz (change this to 60Hz or 50Hz / Outdoor if video output
continues to flicker).
b. That the USB PC camera lens is adjusted for best results.
By default the above Camera Settings page is displayed when you login.
WebCAM user manual
Fig.14. WebCAM Main Menu
Chapter 5: Web Manager
-22-