Unpacking And Checking The Delivery Unit; Make Note Of Identification Data - Siemens SIMATIC 870 V2 Quick Start Manual

Unpacking and connecting the device

2.2 Unpacking and checking the delivery unit

2.2 Unpacking and checking the delivery unit
Procedure
1. Upon delivery, check the packaging for damage incurred during transport.
2. If any transport damage is present at the time of delivery, lodge a complaint at the
3. Unpack the device.
4. Keep the packaging material in case you have to transport the unit again.
5. Please keep the enclosed documentation in a safe place. You will need the
6. Check the package contents for completeness and any visible transport damage. Check
7. Notify the delivery service in charge immediately if the packages contents are incomplete
2.3

Make note of identification data

Procedure
1. Write down the Microsoft Windows Product Key of the Certificate of Authenticity COA in
2. Write down the manufacturer's number SVP and the order number of the computer unit,
Figure 2-1
2-2
shipping company in charge. Have the shipper confirm the transport damage
immediately.
Notice
The packaging protects the device during transport and storage. Therefore, never
dispose of the original packaging material!
documentation when you start up the device for the first time.
for completeness using the enclosed "Contents of Delivery" list.
or damaged.
Warning
Make sure that a damaged unit is not installed nor put into operation.
the table at the end of this section. The product key is located on the power supply cover
of the computer unit. You will need the product key during the reinstallation of the
operating system.
e.g. "6AV..." in the table. If repairs are necessary, the device can be identified by the
service center on the basis of the SVP number and order number.
Both numbers are located on the rating label of the computer unit at the top of the
ventilator side.
Rating label of the computer unit, example
Panel PC 870 V2
QuickStart, Edition 03/2004, A5E00299738