Procedure 2A 2B 2C 2D 2E 2F Assembly of Driving assembly.
Ref. No. 2F
1. Close the housing A and B.
2. Tighten nine housing screws.
3. Apply the grease (DOUBREX / 002X8977) all around the anvil.
4. Assemble the slider to the clutch handle. Confirm it has its own direc-
tion.
5. Place the anvil into the clutch handle.
6. Apply the grease (DOUBREX / 002X8977) on the rear side of fixation
cover.
7. Attach the fixation cover.
8. Tighten four screws.
19