Suzuki SX4/SX4 SEDAN Owner's Manual page 96

INSTRUMENT PANEL
Unit indication of fuel consumption and
driving range
You can change the unit indication of fuel
consumption when selecting instanta-
neous fuel consumption or average fuel
consumption in the display.
You can also change the unit indication of
driving range when selecting driving range
in the display.
To change the unit indication in the display,
follow the instructions below.
You should operate the display before the
vehicle moves.
1) Hold in the "SET" button (8) for more
than 2 seconds.
The unit display of the thermometer will
blink.
2) Push the "M" button (5), and the unit
display of fuel consumption (or driving
range) will blink.
Fuel consumption
4-19
Driving range
3) Push the "SET" button (8) quickly to
change the indication as shown in the
above illustrations.
4) Push the "SET" button (8) for more than
2 seconds, and the unit display will stop
blinking and the display will stay on. If
you don't push the "DISP" button (6)
within about 8 seconds, the unit display
will automatically stop blinking and the
display will stay on.
NOTE:
"MPG" is based on US gallons.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the information display
will be reinitialized. Readjust the display. If
you select driving range, the display will be
shown after driving for a while.
80J080
Front Passenger's Seat Belt
Reminder Light
80J090
The front passenger's seat belt reminder
light is located in the information display. If
there is a passenger in the front seat and
the front passenger's seat belt is unbuck-
led about 10 seconds after the ignition
switch is turned to the "ON" position, this
light will come on and then blink. When the
light comes on, a buzzer will also sound
intermittently for about 6 seconds. The
reminder will repeat several times under
certain conditions until the front passen-
ger's seat belt is buckled. After repeating
several times, the reminder will be can-
celed even if the front passenger's seat
belt remains unbuckled.
80J021