A/T Selector Position Indicator (If Equipped) - Suzuki SX4/SX4 SEDAN Owner's Manual

NOTE:
• When the vehicle speed is increased,
the "i-AWD LOCK" mode will be changed
to the "i-AWD AUTO" mode automati-
cally. The "i-AWD AUTO" indicator light
will come on and stay on.
• When the ignition switch is turned to the
"OFF" position, the "i-AWD LOCK" mode
is canceled.
For details of the "i-AWD LOCK" mode,
refer to "Using the 2WD/i-AWD Switch" in
the "OPERATING YOUR VEHICLE" sec-
tion.
CAUTION
Do not operate your vehicle in "i-
AWD LOCK" mode on dry hard sur-
faces.
Daytime Running Light (D.R.L.) Indi-
cator Light (if equipped)
With the D.R.L. system, the headlights
light, but are dimmer than the low beam,
when the following three conditions are all
met. Whenever the D.R.L. system is oper-
ating, the D.R.L. indicator light remains on.
Conditions for D.R.L. system operation
1) The engine is running.
2) The parking brake is released.
3) The lighting switch is at either the "OFF"
or the "middle" position.
INSTRUMENT PANEL
A/T Selector Position
Indicator (if equipped)
60B245
When the ignition switch is in the "ON"
position, this indicator shows the selector
position of automatic transaxle.
80J031
4-10