Suzuki SX4/SX4 SEDAN Owner's Manual page 229

Center Interior Light (if equipped)
Pull down the lens by using a plain screw
driver covered with a soft cloth as shown.
To install it, simply push it back in.
The bulb can be removed by simply pulling
it out. When replacing the bulb, make sure
that the contact springs are holding the
bulb securely.
Headlights
60G115
Open the engine hood. Remove the cou-
pler and the rubber cover. Then unhook
the bulb holding spring and replace the
bulb.
INSPECTION AND MAINTENANCE
Other General Lights
Bulb holder
EXAMPLE
(2)
(1)
65D149
(1) Removal
(2) Installation
To remove a bulb holder from a light hous-
ing, turn the holder counterclockwise and
pull it out. To install the holder, push the
holder in and turn it clockwise.
54G121
(2)
(1)
54G123
9-40