Server Selection Screen - IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual

Figure 33. Server selection screen
3) In the Server IP field of the Server Selection pane, enter the IP address
of the Server you want to add to the cluster. Alternatively, you can
select the IP address from the dropdown list.
4) Click Next and then click Finish
The Add cluster member wizard closes and the Server is added to the
selected cluster.
5) Go to Chapter 13, "Changing the system date and time," on page 93.
Note: If Server B was not automatically added to the cluster, and you were
unable to add it manually, contact your next level of support. You will need
the customer number when contacting software support. To avoid entitlement
delays, have the customer number available before initiating the call.
Chapter 12. Upgrading ProtecTIER to a cluster
91