Table of Contents
Advertisement
Setting up WAP
WAP browser
Requirements
In order to use the Internet or browse via
WAP services, the following are required:
• A phone subscription that supports data
transmission.
• Settings entered in your phone. Settings may
already be entered when you buy your phone
or you can receive settings in a text message from
your network operator or service provider. You
can also find settings at www.SonyEricsson.com.
• You may also have to register as a WAP user with
your service provider or network operator.
Receiving settings in a text message
Your GSM network operator or Internet service
provider may be able to send the required data
account and WAP settings direct to your phone
in a text message (SMS).
This is the Internet version of the user's guide. © Print only for private use.
Request settings from Sony Ericsson
Use a PC to go to www.SonyEricsson.com. Select
your region and then use the Configurators to
request that a text message be sent to your phone
with the settings you need.
To install settings
When the message arrives, New settings received.
Install? appears:
• Press
to install the new settings. If settings
YES
already exist in your phone you can either keep
or replace them. See "Advanced setting
information" on page 38.
• Press
to cancel installation.
NO
After installation, see "Using WAP" on page 48.
Set up with the wizard
If your phone is not set up for WAP, you can ask
your network operator or service provider to provide
you with WAP settings information. Then you can
simply use the wizard in your phone to help guide
you through the relevant settings.
Setting up WAP
37
Advertisement
Table of Contents
