Epson BrightLink 1480Fi User Manual page 79

addresses: 127.x.x.x (where x is a number from 0 to 255). When these settings are not set, DNS
server information is acquired using DHCP.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press
15. To prevent display of the IP address on the network information screen, turn off IP Address
Display.
16. Select Return and press
17. and select the Network Projection menu then press
18. Set the Epson iProjection setting to On.
19. Select the following options as necessary:
• SSID Display lets you select whether to display the projector's SSID on the standby screen and
Home screen.
Enter to return to the Network Settings menu.
79
Enter.
Enter.