Epson BrightLink 1480Fi User Manual page 225

4. Adjust the angle of the Touch Unit as described in the online Installation Guide.
Note: If you are using an older Touch Unit, refer to the angle adjustment steps in the installation
guide for that model.
5. Calibrate for finger touch interactivity.
6. To write or draw on the projection surface, do the following:
• To select a projected item, such as an icon, tap the projection surface with your finger.
• To draw on the projected screen, tap the projection surface with your finger and drag it as
necessary.
7. To use your finger as a mouse in PC Interactive mode, do the following:
• To left-click, tap the board with your finger.
• To double-click, tap twice with your finger.
• To right-click, press the board with your finger for about 3 seconds (Windows).
• To click and drag, press on and drag an item with your finger.
225