You see a guide screen.
4. Follow the on-screen instructions to adjust the position of the projected image so that the corner
markers appear just inside the yellow area.
5. Press
A guide pattern appears and the projector starts adjusting the image shape.
Note: If necessary, you can fine-tune your image adjustments using the Quick Corner setting.
Parent topic:
Related tasks
Correcting Image Shape with Quick Corner
Applying Saved Image Shape Settings
You can load the image shape settings you selected and saved to the projector's memory and apply
them to the current image.
1. Turn on the projector and display an image.
2. Hold down the Num button on the remote control and press the number button (1, 2, or 3) that
matches the number of the saved image shape setting.
The saved image shape setting is applied and you are prompted to calibrate the screen.
3. Follow the on-screen instructions to calibrate the screen.
Parent topic:
Enter.
Image Shape
Image Shape
124