Running The Manager - Denso BHT-200 Supported Equipment Manual

Terminal Setup
b. To reboot later, click on the option to restart the computer later, and then click on
Finish

Running the Manager

The PowerNet Twin Client Manager is the utility that manages the terminal software and
configurations.
Select
Start
Client Manager screen appears as shown in the following figure. This is the
administrator's main screen, and all functions are accessed from its menu bar, toolbar, and
tabs.
Menu Bar
The menu bar provides access to the functions used to configure the terminals and
manage their software.
Toolbar
Found under the menu bar, the toolbar provides shortcuts to major features. The toolbar
can be turned on or off by changing the Toolbar parameter found on the
shortcuts available from the toolbar are as follows:
The PowerNet Twin Client Manager is now successfully installed and ready for use. The
section below entitled Quick Start provides detailed instructions for quickly configuring
the terminal and starting a Telnet session.
2-4
.
, ,
Programs PowerNet
Create a new terminal configuration.
Open an existing terminal configuration.
Save the current terminal configuration.
Download the configuration to the terminal.
Download software to the terminal.
Configure terminals automatically over the wireless network.
View the PowerNet Twin Client Manager version.
, and
Twin Client Manager
Supported Equipment Manual
. The PowerNet Twin
menu. The
View
•
May, 2006