2. Secure the power connector to the computer by using the single [ M2x2 (Big head 07)] screw.
3. Install the:
a)
system board
b)
system fan
c)
WLAN Card
d)
memory module
e)
heat sink
f)
hard drive assembly
g)
base cover
h)
keyboard
i)
optical drive
j)
battery
4. Follow the procedure in
Display assembly
Removing the display assembly
1. Follow the procedure in
2. Remove the:
a)
battery
b)
optical drive
c)
keyboard
d)
base cover
e)
WLAN card
3. To remove the display assembly:
a) Unroute the WLAN cable [1].
b) Peel the adhesive tape [2].
c) Lift the locking tab [3].
d) Disconnect the eDP cable [4].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
37