Dell Vostro 14–3468 Owner's Manual page 69

Option
C States Control
Intel TurboBoost
Hyper-Thread Control
Table 14. Power Management
Option
AC Behavior
Auto On Time
USB Wake Support
Wake on LAN
Primary Battery Charge Configuration
Description
Default Setting: The option is enabled.
Allows you to enable or disable the additional processor sleep states.
• C states
Default Setting: The option is enabled.
Allows you to enable or disable the Intel TurboBoost mode of the processor.
• Enable Intel TurboBoost
Default Setting: The option is enabled.
Allows you to enable or disable the HyperThreading in the processor.
• Disabled
• Enabled
Default Setting: The option is enabled.
Description
Allows you to enable or disable the computer from turning on automatically when an AC
adapter is connected.
Default Setting: Wake on AC is not selected.
Allows you to set the time at which the computer must turn on automatically. The options are:
• Disabled (default)
• Every Day
• Weekdays
• Select Days
Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If
the AC power adapter is removed during Standby, the system setup will remove
power from all of the USB ports to conserve battery power.
• Enable USB Wake Support
Default Setting: The option is disabled.
Allows you to enable or disable the feature that powers on the computer from the Off state
when triggered by a LAN signal.
• Disabled: This option is enabled by default
• LAN Only
Allows you to select the charging mode for the battery. The options are:
• Adaptive
• Standard — Fully charges your battery at a standard rate.
• Primarily AC use
• Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge
Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this
option, disable the Advanced Battery Charge Configuration option.
System setup 69