General Safety Regulations - Viessmann VITOBLOC 200 Installation Instructions Manual

Safety
3.4

General safety regulations

Only use the CHP unit if it is in perfect technical
condition in accordance with its intended use, and if
you are aware of all safety-relevant factors. Incorrect
handling may result in personal injury and material
damage.
In the event of any defects or faults being identified
with regard to operational safety or operational
reliability, the CHP unit must be shut down
immediately or not started up in the first place.
DANGER
Incorrect handling of the machine with
regard to operational reliability!
Risk to life, serious personal injury
resulting in irreversible damage
Refrain from all unsafe working methods.
Do not carry out any modifications,
additions or alterations to the machine
which may adversely affect safety.
Take measures to ensure safe, fully
functional operation.
Only operate the machine if all protective
and safety equipment is fully functional.
Comply with the safety regulations.
PLEASE NOTE
Unauthorised modification to
programmable control systems!
Serious material damage to the
machine and its surroundings
No unauthorised persons are permitted
within the machine's working area.
Only qualified, trained personnel may
operate the machine.
VITOBLOC 200 EM-530/660 version SCR Installation instructions
●
In the event of malfunctions, shut down and
secure the machine immediately! Correct all faults
immediately.
●
Spare parts must meet the technical requirements
stipulated by the manufacturer. This is always
guaranteed in the case of original spare parts.
●
Appropriate workshop equipment is essential for
carrying out the installation work.
●
The location of fire extinguishers and how they are
used must be made known!
●
Observe the fire alarm and firefighting procedures.
9