Display Modes; Figure 3-1 - Gdu Features And Controls - Garmin G3X Touch Maintenance Manual

Nearest
KNOB
(NRST
3.1.1 GDU Reboot

To reboot GDU without turning off aircraft power, simultaneously and momentarily press the
BACK, MENU and NRST buttons. If the GDU is in configuration mode, it will reboot to normal
mode.

In configuration mode the GDU may be rebooted back to normal mode by selecting the "Save
and Reboot" page.

3.2 Display Modes

3.2.1 Normal Display Mode
PFD: Two PFD display formats are available in normal mode and controlled by the split/full touch field on
the upper portion of the display. Refer to Figure 3-2 and Figure 3-3:

Full display – occupies the entire width of the display

Split format – 50/50 percent display of PFD instrumentation and a Multi-function pane/window, or
a 20/40/40 percent display when the engine bar is present.
The location of the split/full button and the format to be displayed at power up are configured in the
Display Configuration page.
Maintenance Manual
G3X Touch EFIS Part 23 AML STC
SD CARD SLOT
Figure 3-1 – GDU Features and Controls
DIRECT TO
)
Page 19
PHOTOCELL
MENU
KNOB
BACK
190-02472-02
Revision 2