Sunfire SRS210W-B Installation Instructions Manual page 13

Sheetrock installation
1. Apply glue to the framing surround-
ing the cabinet. Also apply glue
to the front surface of the cabinet,
wherever it will be in contact with
the sheetrock.
. Fit the sheetrock in place with
sheetrock screws spaced 4 inches
apart.
4. Carefully cut away the sheetrock to
reveal the cabinet's aperture. Now
that you can see the location better,
add screws to secure the sheetrock
to the front face of the subwoofer
cabinet. Make sure that no screws
pass close to the speaker wires or
the terminal cup.
5. With the cardboard debris shield in
place, the walls can be painted and
finished as required.
6. Leave the cardboard debris shield
in place until you are ready to
install the woofer baffle assembly.
It can be removed by cutting it and
carefully pulling out the rivets hold-
ing it in place.
7. See page 16 for details regarding
the installation of the woofer baffle
assembly and grille frame assem-
bly.
User's Manual
glue
Applying glue for
sheetrocking
Sheetrock over the
subwoofer installation
1