Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sunfire SubRosa XT Series
Summary of Contents for Sunfire SubRosa XT Series
- Page 1 SRS–210W-C Cabinet SRS–210W-B Baffle SRS–210W-G Grille Installation Instructions...
- Page 2 Important Safety receptacles, and the point where they exit the apparatus. Instructions 13. Non-use Periods—The power cord of the apparatus should be unplugged from 1. Read Instructions the outlet when unused for a long period 2. Keep these Instructions of time. 3.
-
Page 3: Table Of Contents
The SubRosa subwoofer is a finely tuned system and should only be used with the Sunfire SRA-2700EQ companion amplifier. Using any other amplifier will offer inferior performance and may void your warranty. Contents Safety Instructions .... Introduction ...... 4 Unpacking ...... -
Page 4: Introduction
Introduction System components Thank you for purchasing this Sunfire XT Series SubRosa™ Subwoofer. We The required components for a func- hope you enjoy it and the music it makes tioning SubRosa in-wall system are: as much as we have enjoyed creating it for you. -
Page 5: Unpacking
1 Allen head screws you in perfect condition. If you do notice SRA–2700EQ amplifier any shipping damage, please contact Sunfire immediately. Make sure that you • SubRosa amplifier keep your sales receipt. It is the only way Dimensions 1.75" (1U) x 17" x 15"... -
Page 6: Dimensions
Dimensions Front View Side View Back View 44.500 in/ 1,130.3 mm 35.590 in/ 904 mm 8.830 in/ 224.3 mm 3.500 in 88.9 mm 26.76 in/ Front Cutout 679.7 mm required in wall to fit woofer assembly 11.784 in/ 299.3 mm User's Manual... -
Page 7: Location
Since your SubRosa subwoofer is de- signed to be professionally installed into your wall, engineering services from your authorized Sunfire dealer and/or outside acoustical resources should be consid- ered to ensure optimum performance. The SubRosa SRA-2700EQ amplifier’s Auto EQ feature will tailor the sound to the room for optimum performance in the location you choose. - Page 8 Sunfire preamplifiers and receivers feature multiple subwoofer outputs for these applications. If your preamplifier has a single sub/LFE output, use a Y cable to split it into two outputs.
-
Page 9: Framing
Framing Vertical mounting It is recommended that you add a Due to residential construction meth- horizontal brace below the cabinet ods, vertical mounting of the cabinet is to raise it above the height of the recommended. The subwoofer cabinet finished floor and baseboard mold- will fit between 2 x 4 inch studs on 16 ing. -
Page 10: Cabinet Installation
Cabinet Installation With the help of an assistant to Use a level to check that the cabi- lift the cabinet, check the fit of the net is vertical. cabinet into the framing. Use wood Use six woodscrews (supplied) or shims if there is any gap between more on each side to secure the the cabinet sides and the vertical cabinet in place. -
Page 11: Wiring
Wiring Install the speaker wires following Do an electrical continuity test to all local codes for electrical wiring make sure the connections are installation. Use class wiring, good from the amplifier-end of the and 1 gauge is recommended, 16 speaker wire to the ends of the gauge is the minimum. -
Page 12: Final Rough-In
Final Rough-in Make sure the debris shield is fitted into the cabinet opening using the plastic push rivets supplied. This will prevent dust and sheetrock debris from entering the cabinet. Debris shield User's Manual... - Page 13 Sheetrock installation Apply glue to the framing surround- ing the cabinet. Also apply glue to the front surface of the cabinet, wherever it will be in contact with the sheetrock. glue glue Applying glue for sheetrocking continued.. User's Manual...
- Page 14 Fit the sheetrock in place with Leave the cardboard debris shield sheetrock screws spaced 4 inches in place until you are ready to apart. install the woofer baffle assembly. It can be removed by cutting it and Carefully cut away the sheetrock to carefully pulling out the rivets hold- reveal the cabinet's aperture.
-
Page 15: Horizontal Mounting
Horizontal mounting In this position, the subwoofer's longest Attach the self-adhesive foam strips side is horizontal. This may be required (supplied) to the cabinet wherever for some installations, although it requires there will be contact with the studs more framing work. or sheetrock. - Page 16 With the help of an assistant to lift sible, add a few screws to secure the cabinet, check the fit into the the bottom face of the cabinet. You framing, and use shims if required. may have to angle them in, but do not screw in to any of the cabinet Wiring the subwoofer is the same joints.
-
Page 17: Baffle Installation
Woofer baffle installation With the cabinet installed, and all the sheetrock, finishing and decorating done, the woofer baffle can be installed. The woofer baffle assembly consists of the following components already installed: • The baffle, upon which all the com- ponents are assembled •... - Page 18 Baffle installation procedure Remove the debris shield from the With the help of an assistant, hold front of the in-wall cabinet. You can the baffle assembly close to the do this by cutting the cardboard in-wall cabinet. with a sharp knife and pulling out Connect the two wires from the the cardboard pieces and the plas- inside of the cabinet to the two...
- Page 19 Before putting the grille frame Secure the woofer baffle assembly and grille on, test the subwoofer to the in-wall cabinet using to verify that all the connections 14 Allen-head screws and washers are made correctly. See the user's supplied. Make sure the two wires guide that comes with your SubRo- do not get pinched.
-
Page 20: Grille Installation
Grille installation Painting With the woofer baffle installed, and the subwoofer tested, the grille can now The frame and grille can be painted to be installed. match the decor before they are installed. The grille assembly consists of the fol- They come already powder coated, and lowing components: can accept a wide range of finishes. - Page 21 Installing the grille assembly Carefully press the grille into the Secure the grille frame to the frame, and make sure it is fully woofer baffle using 12 screws pressed home on all sides. supplied in the grille package. The grille installed into the frame Location of the grille frame screws If you have already painted the frame and grille, please jump to...
- Page 22 For details regarding the operation of the subwoofer and the automatic equal- ization procedure, please refer to the user's guide that comes with the Sunfire SubRosa SRA-2700EQ amplifier. © 2007 Sunfire Corporation. All rights reserved. Sunfire Corporation reserves the right to improve its products at any time.
- Page 23 All implied warranties, including war- ranties or merchantability and fitness NOTE: Before sending in your unit for for particular purposes, are limited in repair, you must call Sunfire for return duration to the five year length of this authorization. Warranty, unless otherwise provided by state law.
- Page 24 SRS–210W-C Cabinet SRS–210W-B Baffle SRS–210W-G Grille Manual 913-14-00 Rev A...