Baxi LUNA DUO-TEC 60 GA Installation Instructions For The Installer page 5

Central Heating (Sealed System)
Heat Exchanger Max Allowable Working Pressure
Max System Pressure
Min System Pressure
Max System Temperature
Pressure Relief Valve Setting
Expansion Tank Minimum Size
(pre-charge press.)
Recommended System Pressure (cold)
Domestic Hot Water (Sealed System)
Max Inlet Water Pressure
Min Inlet Water Pressure
Min DHW Flow Rate
Max DHW Temperature
DHW Water Content
When boiler is operating at maximum operating temperature, providing heating with all heat emitters operating, pressure gauge
should not indicate more than 26.11 psi / 1.80 bar. If reading exceeds this figure larger expansion tank is required.
Available Pump Head For Central Heating
This is a high static head pump fit for installation on any type of single or double pipe heating systems. The automatic air valve
incorporated in the pump allows for quick air purging of the heating system.
Q Water Flow Rate
H Head
1.48 GA/ 60 GA
50 psi [3.45 bar]
30.00
7.25 psi [0.50 bar]
176°F
30.00
2.2 gal at 11.6 psi
[10.0
21.7 psi [1.5 bar]
60 GA
116 psi [8 bar]
2.9 psi [0.2 bar]
0.55 gpm [2.50 L/min]
140°F [60° C]
0.10 gal [0.37 L]
Min Minimum speed of modulation
Max Maximum speed of modulation
5
psi [2.06 bar]
[80°C]
psi [2.11 bar]
L at 0.8 bar]
240012485 REV C [06/30/2019]