Power Liftgate - If Equipped - Jeep Compass 2020 Owner's Manual

Power Liftgate — If Equipped
The power liftgate may be opened or closed by the
key fob, outside handle, overhead console switch,
and the liftgate switch on the upper left trim.
Using any of the following ways:
• When the liftgate is fully closed, the liftgate will open.
• When the liftgate is fully open, the liftgate will close.
• When the liftgate is moving, the liftgate will reverse.
The key fob and the overhead console switch will open the
liftgate when the liftgate is locked. The outside handle
requires the liftgate to be unlocked. Push the button on the
key fob twice within five seconds to open or close the liftgate.
When the liftgate button on the key fob is pushed two times,
the turn signals will flash twice to signal that the liftgate is
opening or closing (if Flash Lamps with Lock is enabled in
the Uconnect settings), and the liftgate chime will be audible.
Refer to "Uconnect Settings" in "Multimedia" for further
information.
GETTING TO KNOW YOUR VEHICLE
NOTE:
• Before closing the liftgate, make sure to be in possession of
the key because the liftgate may be locked.
• Use the interior door lock/unlock button on the door
panel or the key fob to lock and unlock the liftgate. The
manual door locks on the doors and the exterior door lock
cylinder will not lock and unlock the liftgate.
Lock The Vehicle
WARNING!
During power operation, personal injury or cargo
damage may occur. Ensure the liftgate travel path is
clear. Make sure the liftgate is closed and latched before
driving away.
99
2